• No results found

The influence of seating load on internal and marginal fit of a fixed dental prosthesis

N/A
N/A
Protected

Academic year: 2021

Share "The influence of seating load on internal and marginal fit of a fixed dental prosthesis"

Copied!
3
0
0

Loading.... (view fulltext now)

Full text

(1)

The influence of seating load on

internal and marginal fit of a fixed

dental prosthesis

- An in vitro study

Anna Fridell

Hanna Josefsson

Supervisors: Docent Per Vult von Steyern Senior lecturer Anders Falk

Department of material science and technology, Faculty of odontology, Malmö University

Thesis in odontology (30 credits) Malmö University

Program of dentistry Faculty of odontology

(2)

SAMMANFATTNING

Syfte: Syftet med studien var att undersöka hur olika axiala tryck och skjuvkrafter påverkade marginal och intern passform i en sexledsbro i titan i överkäkens frontregion.

Material och metod: En litteratursökning gjordes för att insamla bakgrundsmaterial. Stödtänderna 13 12 11 21 22 23 preparerades på en plastmodell för en sexledsbro och en

anatomiskt utformad bro i titan framställdes med hjälp CAD/CAM. En mastermodell av stödtänderna tillverkades i epoxyresin. Genom att använda replikateknik utvärderades brons passform vid olika cementeringstryck; 20, 35, 50, 70 N och 50 N med skjuvkrafter. Varje replika snittades med hjälp av en ”jig” och cementspalten analyserades i ett mikroskop. All data granskades statistiskt.

Resultat: Resultatet visade att ett tryck med 20 N generellt gav en ej acceptabel passform och ett tryck med 35 N hade en stor spridning. Vid tryck med 50 N kunde mindre cementspalter ses. De blev inte mindre vid test med 70 N. När skjuvkrafter adderades försämrades resultaten jämfört med försöken med 50 N och 70 N.

Konklusion: Ett tryck vid cementering som överstiger 50 N förbättrar ej passformen markant. Närvaro av skjuvkrafter påverkar passformen negativt. Ett lägre tryck på 20 N ger dock en mindre fördelaktig passform jämfört med skjuvkrafter förutsatt att ett tillräckligt högt tryck används. Alla slutsatser var statistiskt signifikanta.

(3)

ABSTRACT

Purpose: The purpose of this study is to investigate how different axial seating loads and shear loads influences the marginal and internal fit of a titanium six unit FDP in the upper jaw frontal region.

Materials and Methods: A literature search was made to acquire background material. Preparations of abutment teeth for a six unit FDP 13 12 11 21 22 23 were made on plastic teeth, and an anatomically designed titanium FDP was constructed using CAD/CAM. A master cast of the abutment teeth was fabricated in epoxy resin. Using the impression replica technique the fit of the FDP was evaluated by different seating loads during cementation; 20, 35, 50, 70 N and 50 N under the presence of shear loads. The replicas were sectioned using a jig and the cement gap was analysed using a microscope. All the data were statistically analysed.

Results: The results showed that a seating load of 20 N generally gave an unacceptable fit and that the seating load of 35 N had great range. At seating loads of 50 N less cement gaps could be seen, i.e. more favourable fit. These results did not improve when testing with 70 N. With a presence of shear loads the results were poorer than when testing with 50 and 70 N.

Conclusions: A seating load exceeding 50 N during cementation does not markedly give a more favourable fit. The presence of shear loads affects the fit negatively. A lower seating load of 20 N gives a less favourable fit compared to shear loads provided that a seating load high enough is used. All of these conclusions were statistically significant.

References

Related documents

Choice experiment results for the respondents who received a questionnaire where the lottery that stayed the same in all rounds was called B (the version were the names of lottery A

The organic phases were combined, washed using water (4 x 50 mL) and brine (3 x 50 mL), dried over anhydrous Na2SO4 and filtered before the solvent was removed under reduced

Denna del av arbetet begränsas till att undersöka konkurrenternas lösningar för att hålla kablaget på plats på insida rambalk, för att se om det finns andra mer

This paper reframes the labor question according to the normal juridical principle of imputation whose application to property appropriation is the modern treatment of the old

Helt plötsligt ändrar sig läraren och säger emot sig själv, även detta är något man kan belysa som en s.k. Innan hade läraren sagt att det oftast blir ”halv bra för

Även om de skriftliga källorna kan ge insikt i områden som annars skulle ha förblivit fördolda, har närvaron av skriftliga källor fått till följd att den historiska arkeolo- gin

År då detta hedersnamn berättigaU Stödde Karl IX verkligen sin makt i första hand på bönderna~ Inlade han kanske så stora förtjänster om allmogens andliga

De söker sig till biblioteken för att få forskningshjälp, inte inom sitt ämne utan inom det bibliografiska område som hör dit.. Att ge den hjälpen, vilket