• No results found

Technical Data – Audi Q5 hybrid quattro tiptronic (155 kW) Program for Germany Status: April 2012 Engine / electronics

N/A
N/A
Protected

Academic year: 2022

Share "Technical Data – Audi Q5 hybrid quattro tiptronic (155 kW) Program for Germany Status: April 2012 Engine / electronics"

Copied!
1
0
0

Loading.... (view fulltext now)

Full text

(1)

Technical Data – Audi Q5 hybrid quattro tiptronic (155 kW)

Program for Germany Status: April 2012

Engine / electronics

Engine type 4-cylinder inline spark-ignition engine with gasoline direct injection, exhaust

turbocharger and Audi valvelift system

Valve gear / number of valves per cylinder Roller cam followers; continuous intake camshaft adjustment; exhaust valve stroke adjustment AVS / 4

Displacement in cc 1984 / 82.5 x 92.8 / 9.6

Max. power output in kW (hp) / at rpm 155 (211) / 4300 – 6000

Max. torque in Nm (lb-ft) / at rpm 350 (258.15) / 1500 - 4200

Mixture preparation Sequential high-pressure direct injection with adaptive idle-charge control,

overrun fuel cut-off, adaptive lambda control; mapped ignition with solid-state high-voltage distribution via single-spark coils, cylinder-selective adaptive

knock control; air-mass measurement, integrated boost-pressure control

Exhaust emission control Close-coupled ceramic catalytic converter, oxygen sensor before and after

catalytic converter, secondary air system

Emissions class EU5

Alternator in A / battery in A/Ah DC/DC converter 180 / lead-fleece 380/68

Drivetrain / transmission

Drive type quattro permanent all-wheel drive with self-locking center differential, electronic

stabilization control ESC

Clutch Two electrohydraulically controlled multi-plate clutches in an oil bath

Transmission type 8-speed tiptronic with integrated electric motor

Gear ratio in 1st gear / 2nd gear 4.714 / 3.143

Gear ratio in 3rd gear / 4th gear 2.106 / 1.667

Gear ratio in 5th gear / 6th gear 1.285 / 1.000

Gear ratio in 7th gear / 8th gear 0.839 / 0.667

Reverse gear / final drive ratio 3.317 / 3.760

Suspension / steering / brakes

Front suspension Five-link front suspension, upper and lower wishbones, tubular anti-roll bar

Rear suspension Independent-wheel, trapezoidal-link rear suspension with resiliently mounted

subframe, tubular anti-roll bar

Steering / steering ratio / turning circle in meters (D102) (feet) Electromechanical steering with speed-dependent power assistance / 15.9 / 11.6 (38.06)

Brake system Dual-circuit brake system with diagonal split, ABS/EBD and electronic

stabilization control ESC with brake assist; tandem brake booster; front:

ventilated disks / rear: ventilated disks

Wheels / tires 8J x 19 cast aluminum wheels / 235/55 R 19

Performance / consumption / acoustics

Top speed in km/h (mph) 225 (139.81)

Acceleration, 0-100 km/h (0-62.14 mph) in sec 7.1

Fuel / octane value Premium sulfur-free according to EN 228 / 95 RON

Fuel consumption: city / highway / combined, l/100 km (US mpg) 6.6 (35.64) / 7.1 (33.13) / 6.9 (34.09)

CO2 mass emission, g/km (g/mile) 151 (243.01) / 164 (263.93) / 159 (255.89)

Idling / drive-past exterior noise level in dB (A) Drive-past exterior noise level: 73

Hybrid drive

Electrical power output in kW (hp) briefly 40 (54) (briefly)

Electrical torque output in Nm (lb-ft) briefly 210 (154.89) (briefly)

Total system power output in kW (hp) briefly 180 (245) (briefly)

Total system torque output in Nm (lb-ft) briefly 480 (354.03) (briefly)

Battery type Lithium-ion

Battery energy content in kWh 1.3

Servicing / guarantee (Germany)

LongLife Service after max. km (miles) According to service indicator up to 30,000 km (18,641.14) or max. 2 years

Vehicle / paint / rust perforation guarantee 2 years with unlimited mileage / 3 years / 12 years Insurance classification in Germany: third party / fully comprehensive / part-

comprehensive

20 / 22 / 22

Weights / loads

Unladen weight according to EU (excluding driver) / (including driver) / gross weight limit in kg (pounds)

1910 (4210.83) / 1985 (4376.18) / 2490 (5489.51)

Axle load limit at front / rear in kg (pounds) 1220 (2689.64) / 1350 (2976.24)

Trailer load limit on 8% / 12% gradient, braked / unbraked in kg (pounds) 2400 (5291.09) / 2000 (4409.25) / 750 (1653.47)

Roof load limit / permissible nose weight; in kg (pounds) 75 (165.35) / 100 (220.46)

Capacities

Engine oil capacity (including filter) in liters (US quarts) 4.6 (4.86)

Fuel tank capacity in liters (US gallons) 72 (19.02)

Body / dimensions

Body type / number of doors / seats Galvanized, unitary steel body, crumple zones at front and rear / 5 / 5

Drag coefficient Cd / frontal area A in m2 (square feet) 0.32 / 2.65 (28.52)

Length (L103) / width excluding mirrors (W103) / height (H101-M), in mm (feet) 4629 (15.19) / 1898 (6.23) / 1627 (5.34)

Wheelbase (L101) / track at front/rear (W101-1/W101-2), in mm (feet) 2812 (9.23) / 1625 (5.33) / 1620 (5.31)

Height of loading lip in mm (H196) (feet) 666 (2.19)

Luggage capacity in liters (cubic feet) , according to VDA block method (V211) / rear seat bench folded

460 (16.24) (V211-2) / 1480 (52.27) (V214-1)

References

Related documents

Imaging in PVE patients is also used to determine the extension of infection, which influences the decision of therapy (conservative/surgical) [17]. The identi- fication of patients

In quest of the best performing aortic valve substitute for different patient groups we have studied: early autograft regurgitation, autograft and native aortic

 The different strategies of intake throttle, exhaust brake, Miller EIVC, Miller LIVC, EEVO, LIVO 1-valve, EV-bump, IV-bump, and EV-IV phase shift can all be used

Inlet flow speed (averaged), hydraulic torque acting on the disc, angular position and velocity are therefore monitored throughout the whole simulation period and used to find out

In an ordinary flow direction controlled servo valve, which is commonly used in position, velocity and force servos, the main spool position is proportional to the input

However if the training were to exclusively focus on one of the facets, exempli gratia, the job slot the individual occupies upon repatriation, then it is expected

Now, let B and L denote two financial institutions as in a regular transaction, whereas the bank B enters into a transaction with bank L in terms of borrow- ing money from the

SeeDB and Scale are ex- amples of methods that obtain optical clearing by immersion in a medium with refractive in- dex matching that of biological tissue.. These methods result in