Copper and copper alloys – Compendium of compositions and products

(1)

Teknisk specifikation

SIS-CEN/TS 13388:2020

Språk: engelska/English Utgåva: 5

Koppar och kopparlegeringar – Sammandrag av kemiska sammansättningar och produktformer

Copper and copper alloys – Compendium of compositions and products

This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80021038

standard via https://www.sis.se/std-80021038 standard via https://www.sis.se/std-80021038 standard via https://www.sis.se/std-80021038

(2)

© Copyright/Upphovsrätten till denna produkt tillhör Svenska institutet för standarder, Stockholm, Sverige.

Upphovsrätten och användningen av denna produkt regleras i slutanvändarlicensen som återfinns på sis.se/slutanvandarlicens och som du automatiskt blir bunden av när du använder produkten. För ordlista och förkortningar se sis.se/ordlista.

© Copyright SSvenska institutet för standarder, Stockholm, Sweden. All rights reserved. The copyright and use of this product is governed by the end-user licence agreement which you automatically will be bound to when using the product. You will find the licence sis.se/enduserlicenseagreement.

Upplysningar om sakinnehållet i standarden lämnas av Svenska institutet för standarder, telefon 08 - 555 520 00.

Standarder kan beställas hos SIS som även lämnar allmänna upplysningar om svensk och utländsk standard.

Dokumentet är framtaget av kommittén för Koppar, SIS/TK 132.

Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på www.sis.se - där hittar du mer information.

Den här standarden kan hjälpa dig att effektivisera och kvalitetssäkra ditt arbete. SIS har fler tjänster att erbjuda dig för att underlätta tillämpningen av standarder i din verksamhet.

SIS Abonnemang

Snabb och enkel åtkomst till gällande standard med SIS Abonnemang, en prenumerationstjänst genom vilken din organisation får tillgång till all världens standarder, senaste uppdateringarna och där hela din organisation kan ta del av innehållet i prenumerationen.

Utbildning, event och publikationer

Vi erbjuder även utbildningar, rådgivning och event kring våra mest sålda standarder och frågor kopplade till utveckling av standarder. Vi ger också ut handböcker som underlättar ditt arbete med att använda en specifik standard.

Vill du delta i ett standardiseringsprojekt?

Genom att delta som expert i någon av SIS 300 tekniska kommittéer inom CEN (europeisk standardisering) och/eller ISO (internationell standardisering) har du möjlighet att påverka standardiseringsarbetet i frågor som är viktiga för din organisation. Välkommen att kontakta SIS för att få veta mer!

Kontakt

Skriv till kundservice@sis.se, besök sis.se eller ring 08 - 555 523 10

Fastställd: 2020-04-06 ICS: 77.120.30; 77.150.30

(3)

Denna tekniska specifikation är inte en svensk standard. Detta dokument innehåller den engelska språkversionen av CEN/TS 13388:2020.

Detta dokument ersätter SIS-CEN/TS 13388:2015, utgåva 4.

This Technical Specification is not a Swedish Standard. This document contains the English language version of CEN/TS 13388:2020.

This document supersedes SIS-CEN/TS 13388:2015, edition 4.

This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80021038

(4)

(5)

TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION

CEN/TS 13388

April 2020

ICS 77.120.30; 77.150.30 Supersedes CEN/TS 13388:2015

English Version

Copper and copper alloys - Compendium of compositions and products

Cuivre et alliages de cuivre - Inventaire des

compositions et des produits Kupfer und Kupferlegierungen - Übersicht über Zusammensetzungen und Produkte

This Technical Specification (CEN/TS) was approved by CEN on 21 October 2019 for provisional application.

The period of validity of this CEN/TS is limited initially to three years. After two years the members of CEN will be requested to submit their comments, particularly on the question whether the CEN/TS can be converted into a European Standard.

CEN members are required to announce the existence of this CEN/TS in the same way as for an EN and to make the CEN/TS available promptly at national level in an appropriate form. It is permissible to keep conflicting national standards in force (in parallel to the CEN/TS) until the final decision about the possible conversion of the CEN/TS into an EN is reached.

CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E UR O P É E N DE N O R M A L I SA T I O N E UR O P Ä I SC H E S KO M I T E E F ÜR N O R M UN G

CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels

worldwide for CEN national Members. Ref. No. CEN/TS 13388:2020 E

SIS-CEN/TS 13388:2020 (E)

(6)

2

European foreword

This document (CEN/TS 13388:2020) has been prepared by Technical Committee CEN/TC 133 “Copper and copper alloys”, the secretariat of which is held by DIN.

Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.

This document supersedes CEN/TS 13388:2015.

In comparison with CEN/TS 13388:2015, the following changes were made:

a) modifications regarding materials and compositions from EN 1982:2017, EN 12164:2016, EN 12165:2016, EN 12167:2016, EN 12168:2016, EN 12449:2016+A1:2019, EN 12735-1:2016 and EN 12861:2018 considered.

According to the CEN/CENELEC Internal Regulations, the national standards organisations of the following countries are bound to announce this Technical Specification: Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.

SIS-CEN/TS 13388:2020 (E)

(9)

5

Introduction

CEN/TC 133 “Copper and copper alloys” was established in 1988 to prepare and maintain standards in the field of unwrought, wrought and cast products made from copper and copper alloys. Its responsibilities included developing, defining, specifying and giving guidance on, as appropriate, material compositions, designations, terminology, dimensions and tolerances, mechanical and physical characteristics, conditions of delivery and methods of testing peculiar to copper and copper alloys.

During the development of standards for copper and copper alloy products, the experts realized the necessity and seized the opportunity:

a) to coordinate and in some cases also to rationalize the composition limits which already existed for the various product forms;

b) to establish unique, new and identifiably European designations for copper and copper alloys, including a numerical option to be particularly convenient for computerized handling;

c) to confirm, clarify and redefine where necessary, the terminology which already existed in common usage, at the international level or in customs nomenclature.

CEN/TC 133 decided, in view of the new form of presentation and new parameters for the description and provision of information on copper and copper alloy products, to prepare and publish the present consolidation and summary of essential details.

SIS-CEN/TS 13388:2020 (E)

(10)

6

1 Scope

This document provides a summary of material designations, compositions and the product forms in which they are available, for coppers and copper alloys standardized in European Standards by CEN/TC 133 “Copper and copper alloys”.

2 Normative references

The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

EN 1976, Copper and copper alloys — Cast unwrought copper products EN 1982:2017, Copper and copper alloys — Ingots and castings

3 Compositions of coppers and copper alloys standardised by CEN/TC 133

3.1 Composition of coppers

The symbol and number designations and compositions of copper grades are given in the following tables:

Table 1.1 — Composition of copper cathodes according to EN 1978:1998, Cu-CATH-1 (CR001A) and Cu-CATH-2 (CR002A)

Table 1.2 — Composition of unalloyed copper grades made from Cu-CATH-1 (CR001A) according to EN 1978

Table 1.3 — Composition of unalloyed copper grades, other than those made from Cu-CATH-1 (CR001A) according to EN 1978

Table 1.4 — Composition of phosphorus-containing copper grades

Table 1.5 — Composition of silver-containing copper grades (silver-bearing coppers) 3.2 Composition of copper alloys

The symbol and number designations and compositions of copper alloys are given in the following tables:

Table 2 — Composition of copper alloys, low alloyed (less than 5 % alloying elements) Table 3 — Composition of copper-aluminium alloys

Table 4 — Composition of copper-nickel alloys Table 5 — Composition of copper-nickel-zinc alloys Table 6 — Composition of copper-tin alloys

Table 7 — Composition of copper-zinc alloys, binary SIS-CEN/TS 13388:2020 (E)

(11)

7 Table 8 — Composition of copper-zinc-lead alloys

Table 9 — Composition of copper-zinc alloys, complex 3.3 Composition of master alloys

The symbol and number designations and compositions of master alloys in accordance with EN 1981:2003 are given in Table 11.

3.4 Composition of ingots and castings

The symbol and number designations and compositions of ingots and castings in accordance with EN 1982:2017 are given in the following tables:

Table 12.1 — Ingots and castings — Copper and copper-chromium alloys — Compositions and casting processes

Table 12.2 — Ingots and castings — Copper-zinc alloys — Composition and casting processes Table 12.3 — Ingots and castings — Copper-zinc-aluminium alloys — Composition and casting processes

Table 12.4 — Ingots and castings — Copper-zinc-lead alloys — Composition and casting processes Table 12.5 — Ingots and castings — Copper-zinc-silicon alloys — Composition and casting processes

Table 12.6 — Ingots and castings — Other copper-zinc alloys — Composition and casting processes Table 12.7 — Ingots and castings — Copper-tin alloys — Composition and casting processes

Table 12.8 — Ingots and castings — Copper-tin-zinc-lead alloys — Composition and casting processes

Table 12.9 — Ingots and castings — Copper-tin-lead alloys — Composition and casting processes Table 12.10 — Ingots and castings — Copper-aluminium alloys — Composition and casting processes

Table 12.11 — Ingots and castings — Copper-manganese alloys — Composition and casting processes

Table 12.12 — Ingots and castings — Copper-nickel alloys — Composition and casting processes Table 12.13 — Ingots and castings — Copper-silicon-zinc alloys — Composition and casting processes

3.5 Composition of copper and copper alloy scrap

The symbol and number designations and compositions of copper and copper alloy scrap in accordance with EN 12861:2018 are given in Table 13.

SIS-CEN/TS 13388:2020 (E)

Copper and copper alloys – Compendium of compositions and products

Teknisk specifikation

SIS-CEN/TS 13388:2020

Koppar och kopparlegeringar – Sammandrag av kemiska sammansättningar och produktformer

Copper and copper alloys – Compendium of compositions and products

TECHNICAL SPECIFICATION SPÉCIFICATION TECHNIQUE TECHNISCHE SPEZIFIKATION

CEN/TS 13388

Copper and copper alloys - Compendium of compositions and products

Contents

European foreword

Introduction

1 Scope

2 Normative references

3 Compositions of coppers and copper alloys standardised by CEN/TC 133