• No results found

On System Safety and Reliability Methods in Early Design Phases

N/A
N/A
Protected

Academic year: 2021

Share "On System Safety and Reliability Methods in Early Design Phases"

Copied!
2
0
0

Loading.... (view fulltext now)

Full text

(1)

Linköping Studies in Science and Technology Thesis No. 1600

On System Safety and Reliability Methods

in Early Design Phases

Cost Focused Optimization Applied on Aircraft Systems

Cristina Johansson

C

ristina J

ohansson

O

n S

ystem S

afety and R

eliability M

ethods in Early D

esign P

hases

2013

(2)

Division of Machine Design

Department of Management and Engineering Linköping University

SE-581 83 Linköping, Sweden Linköping 2013

C

ristina J

ohansson

O

n S

ystem S

afety and R

eliability M

ethods in Early D

esign P

hases

2013

References

Related documents

Here, environmental technology refers to technologies (products, services, organizational models, and large-scaled technical systems) whose development and use

For routing in IC-MANETs we have developed a beacon-less delay-tolerant geographic routing protocol named LAROD (location aware routing for delay-tolerant networks) and

SAA , intracheally injected with both 1) 4 million alveolar macrophages loaded with commercial BaSO4 contrast agent for CT or 2) 2 million alveolar macrophages loaded with GdNP as

the District in turn is divided into Communes, and the Commune into Villages and/or Hamlets. There are people’s committees at the provincial, district, commune and village levels.

The articles associated with this thesis have been removed for copyright reasons. For more details about

The mechanism of the coupling between the mass and charge transfer in electrochemical systems, and particularly in conductive polymer based system, is highly

Most of these cases however, stem from large enterprises or IT-intensive small or medium-sized enterprises (SME). The current ontology development methodologies are not tailored

The results obtained for class-E power amplifier using GaN HEMT are; the power added efficiency (PAE) of 70 % with a gain of 13.0 dB at an output power of 43.0 dBm,