• No results found

Modelling of Failure in High Strength Steel Sheets

N/A
N/A
Protected

Academic year: 2021

Share "Modelling of Failure in High Strength Steel Sheets"

Copied!
1
0
0

Loading.... (view fulltext now)

Full text

(1)

Modelling of Failure

in High Strength Steel Sheets

Linköping Studies in Science and Technology Thesis No. 1529

Oscar Björklund

Division of Solid Mechanics Division of Solid Mechanics

Department of Management and Engineering Linköping University

SE-58183, Linköping, Sweden www.liu.se

Copyright © 2012 by Oscar Björklund

ISBN 978-91-7519-895-5 ISSN 0280-7971 LIU-TEK-LIC-2012:14

M

odelling of F

ailure in H

igh Strength Steel Sheets

Oscar B

jörklund

References

Related documents

For routing in IC-MANETs we have developed a beacon-less delay-tolerant geographic routing protocol named LAROD (location aware routing for delay-tolerant networks) and

SAA , intracheally injected with both 1) 4 million alveolar macrophages loaded with commercial BaSO4 contrast agent for CT or 2) 2 million alveolar macrophages loaded with GdNP as

The articles associated with this thesis have been removed for copyright reasons. For more details about

The results obtained for class-E power amplifier using GaN HEMT are; the power added efficiency (PAE) of 70 % with a gain of 13.0 dB at an output power of 43.0 dBm,

The mechanism of the coupling between the mass and charge transfer in electrochemical systems, and particularly in conductive polymer based system, is highly

Most of these cases however, stem from large enterprises or IT-intensive small or medium-sized enterprises (SME). The current ontology development methodologies are not tailored

Paper II Failure of high strength steel sheet - Experiments and modelling Failure in thin sheet metal structures of ductile material is usually caused by one of, or a combination

1994, "The promoter of the barley aleurone-specific gene encoding a putative 7 kDa lipid transfer protein confers aleurone cell-specific expression in transgenic rice",