• No results found

Electric Vehicle Charging Station Markets:

N/A
N/A
Protected

Academic year: 2021

Share "Electric Vehicle Charging Station Markets:"

Copied!
2
0
0

Loading.... (view fulltext now)

Full text

(1)

Degree Project for MSc in Industrial Management and Engineering ISRN: BTH-AMT-EX—2012/CIIE-02--SE

Supervisors: Phil. Dr. Gunilla Åkesson-Nilsson Frank Brunell

Carl Olofsson

Photo: Viktor Österberg, 2012

Department of Mechanical Engineering

Blekinge Institute of Technology

Karlskrona, Sweden

2012

Viktor Österberg

Electric Vehicle Charging Station

Markets:

(2)

School of Engineering, Department of Mechanical Engineering Blekinge Institute of Technology, Campus Gräsvik

SE-371 79 Karlskrona, SWEDEN

Telephone: Fax:

+46 455-38 55 02 +46 455-38 55 07

References

Related documents

Luleå University of Technology MSc Programmes in Engineering Electrical Engineering Department of Computer Science and Electrical Engineering Division of Signal Processing 2006:184

You can also include the European Project Semester (EPS), 30 ECTS to your exchange studies in Construction Engineering,

The student had adequate previous knowledge for the Degree project.. The student had enough of practical/laboratory skills to successfully complete

The student had adequate previous knowledge for the Degree project.. The student had enough of practical/laboratory skills to successfully complete

If 50% of the whole Swedish vehicle fleet was electricity-driven with an EVC pattern based on the travel pattern and charging opportunities in the case study with the EVC-D model,

The case study using this model compares the resulting impact to EVC load profiles, when considering different type-of-trips with related consumption levels and charging opportunities,

E-leadership is a response to the global changes in technology (Snellman, 2014, p. 1255) and is defined as a process, that is intertwined with advanced information technology,

It is also used to estimate the production costs using a suitable cost model and parts lead time.. The results are compared to those of traditional