Språk: engelska/English Utgåva: 4
stålprodukter framtagna inom europeiska kommitten för standardisering av järn och stål (ECISS)
European certified reference materials (EURONORM-CRMs) for the determination of the chemical composition of iron and steel products
This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80023052
standard via https://www.sis.se/std-80023052 standard via https://www.sis.se/std-80023052 standard via https://www.sis.se/std-80023052
Fastställd: 2020-07-14 ICS: 71.040.30;77.140
Det här dokumentet kan hjälpa dig att effektivisera och kvalitetssäkra ditt arbete. SIS har fler tjänster att erbjuda dig för att underlätta tillämpningen av standarder i din verksamhet.
SIS Abonnemang
Snabb och enkel åtkomst till gällande standard med SIS Abonnemang, en prenumerationstjänst genom vilken din orga- nisation får tillgång till all världens standarder, senaste uppdateringarna och där hela din organisation kan ta del av innehållet i prenumerationen.
Utbildning, event och publikationer
Vi erbjuder även utbildningar, rådgivning och event kring våra mest sålda standarder och frågor kopplade till utveckling av standarder. Vi ger också ut handböcker som underlättar ditt arbete med att använda en specifik standard.
Vill du delta i ett standardiseringsprojekt?
Genom att delta som expert i någon av SIS 300 tekniska kommittéer inom CEN (europeisk standardisering) och/eller ISO (internationell standardisering) har du möjlighet att påverka standardiseringsarbetet i frågor som är viktiga för din organisation. Välkommen att kontakta SIS för att få veta mer!
Kontakt
Skriv till kundservice@sis.se, besök sis.se eller ring 08 - 555 523 10
© Copyright/Upphovsrätten till denna produkt tillhör Svenska institutet för standarder, Stockholm, Sverige.
Upphovsrätten och användningen av denna produkt regleras i slutanvändarlicensen som återfinns på sis.se/slutanvandarlicens och som du automatiskt blir bunden av när du använder produkten. För ordlista och förkortningar se sis.se/ordlista.
© Copyright Svenska institutet för standarder, Stockholm, Sweden. All rights reserved. The copyright and use of this product is governed by the end-user licence agreement which you automatically will be bound to when using the product. You will find the licence at sis.se/enduserlicenseagreement.
Upplysningar om sakinnehållet i standarden lämnas av Svenska institutet för standarder, telefon 08 - 555 520 00.
Standarder kan beställas hos SIS som även lämnar allmänna upplysningar om svensk och utländsk standard.
Dokumentet är framtaget av kommittén Kemiska analysmetoder för metaller, SIS/TK 122.
Har du synpunkter på innehållet i den här standarden, vill du delta i ett kommande revideringsarbete eller vara med och ta fram andra standarder inom området? Gå in på www.sis.se - där hittar du mer information.
This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80023052
Denna tekniska rapport är inte en svensk standard. Detta dokument innehåller den engelska språkversionen av CEN/TR 10317:2020.
Detta dokument ersätter SIS-CEN/TR 10317:2015, utgåva 3.
This Technical Report is not a Swedish Standard. This document contains the English language version of CEN/TR 10317:2020.
This document supersedes SIS-CEN/TR 10317:2015, edition 3.
This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80023052
English Version
European certified reference materials (EURONORM- CRMs) for the determination of the chemical composition
of iron and steel products
Matériaux de référence certifiés européens (EURONORM-MRC) destinés à la détermination de la composition chimique des produits en acier et en fonte
Europäische zertifizierte Referenzmaterialien (EURONORM-ZRM) für die Bestimmung der chemischen Zusammensetzung von Eisen und
Stahlerzeugnissen
This Technical Report was approved by CEN on 22 June 2020. It has been drawn up by the Technical Committee CEN/TC 459/SC 2.
CEN members are the national standards bodies of Austria, Belgium, Bulgaria, Croatia, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Republic of North Macedonia, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and United Kingdom.
EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E UR O P É E N DE N O R M A L I SA T I O N E UR O P Ä I SC H E S KO M I T E E F ÜR N O R M UN G
CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels
© 2020 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members. Ref. No. CEN/TR 10317:2020 E
2
Contents
PageEuropean foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Classification of EURONORM-CRMs ... 5
3 Preparation of the samples ... 6
3.1 EURONORM-CRMs of cast and wrought materials... 6
3.2 EURONORM-CRMs of non-metallic materials ... 6
4 Certification ... 7
4.1 Main rules ... 7
4.2 Main content of the certificates ... 7
5 Sample presentation ... 8
6 Distribution of EURONORM-CRMs... 9
7 Details of current EURONORM-CRMs ... 10
Bibliography ... 11 SIS-CEN/TR 10317:2020 (E)
This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80023052
3 held by SIS.
Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN shall not be held responsible for identifying any or all such patent rights.
This document supersedes CEN/TR 10317:2014.
In comparison with the previous edition, CEN/TR 10317:2014, the following technical modifications have been made:
— title changed;
— deletion of all references to COCOR and ECISS;
— updating of the addresses of some of the producers;
— Bibliography updated.
4
Introduction
In accordance with the definition in ISO Guide 30, a Certified Reference Material (CRM) as described in this document is a “reference material (RM) characterized by a metrologically valid procedure for one or more specified properties, accompanied by a certificate that provides the value of the specified property, its associated uncertainty, and a statement of metrological traceability”.
Furthermore, it is accompanied by a certificate issued by the producing organization, after approval by the participating laboratories and all the producing organizations listed below:
a) France:
1) ArcelorMittal Maizières Research SA (AMMZ) [former Institut de Recherches de la Sidérurgie Française (IRSID)],
2) Centre Technique des Industries de la Fonderie (CTIF);
b) Germany: Iron and Steel CRM Working Group (AGZRM) comprising:
1) Bundesanstalt für Materialforschung und -prüfung (BAM), 2) Max-Planck-Institut für Eisenforschung (MPI),
3) Stahlinstitut VDEh;
c) Nordic Countries: Nordic CRM Working Group, (NCRMWG) comprising:
1) Oy Narema AB, 2) Jernkontoret.
NOTE Bureau of Analysed Samples Ltd (BAS) – United Kingdom – was a member of the EURONORM-CRM Producer's Group from 1975 until 2013.
Since 1968, EURONORM-CRMs have been analysed by laboratories in most countries in the European Union (EU) or former European Community (EC).
Pending their eventual replacement by EURONORM-CRMs, a number of former national CRMs prepared, analysed and certified by laboratories in Germany, France and the United Kingdom respectively, were accepted as EURONORM-CRMs after their accuracy had been checked by other European laboratories. This procedure ceased in 1990.
SIS-CEN/TR 10317:2020 (E)
This preview is downloaded from www.sis.se. Buy the entire standard via https://www.sis.se/std-80023052