• No results found

AWP-10P SERIES SHROUDED HEADER PITCH 2.54 MMAWP-10P SERIES SHROUDED HEADER PITCH 2.54 MM DATA SHEETDATA SHEET

N/A
N/A
Protected

Academic year: 2022

Share "AWP-10P SERIES SHROUDED HEADER PITCH 2.54 MMAWP-10P SERIES SHROUDED HEADER PITCH 2.54 MM DATA SHEETDATA SHEET"

Copied!
1
0
0

Loading.... (view fulltext now)

Full text

(1)

D A T A S H E E T D A T A S H E E T

Specification:

1) Operating Temperature: 0°C ~ 85°C 2) Contact Resistance: 20 mW max. (initial) 3) Insulation Resistance: 1000 MW min 4) Dielectric Withstanding Voltage:

1000 VAC per minute

H O U S I N G C O L O U R

G gray

omitted when standard colour (black) N O . O F C O N T A C T S

10, 14, 16, 20, 26, 30, 34, 40, 50, 60, 64

Housing Colour

No. of Contacts

Dip Plug Connector Pitch 2.54 mm Ejector Type

Mounting Type

A W P - 1 0 P S G

E J E C T O R T Y P E

S short W without

omitted when standard ejector (long)

M O U N T I N G T Y P E

P straight K right angle

AWP-10P SERIES SHROUDED HEADER PITCH 2.54 MM

AWP-10P SERIES SHROUDED HEADER PITCH 2.54 MM

References

Related documents

In the real world bit-errors will result in lost packets and the loss of a full header can cause inconsistent compression state at compressor and decompressor, resulting in

During the whole backoff period, full headers contribute 1.5 octets to the average header size when H = 48 and C = 4. For 20 ms voice samples, it takes less than 1.3 seconds

Whenever a full header would have changed the compression state and the packet carrying that full header is lost, subsequent compressed headers will be decompressed incorrectly due

Bygglov beviljas för nybyggnad av två förråd samt fasadändring av förskola på fastigheten Hörby 42:16.. Beslutet är fattat med stöd av 9 kap 30 § Plan-

(b) Ett annat s¨att att g¨ora j¨amf¨orelsen mellan tv˚a serier av detta slag ¨ar att titta p˚a ”tecknet” i j¨amf¨orelsen, dvs antalet positiva skillnader n¨ar man tar

(Kommentar: L¨osningen beh¨over visa hela tidsf¨orloppet (inklusive deadlines) fram till t=24, tala om de inb¨ordes prioriteterna f¨or P1, P2, P3 och P4 vid RMS, korrekt dra

Skulle ett nytt v¨ arde p ˚a limit vara mindre ¨ an count (antalet processer i barri¨ aren), eller om count uppn ˚att v¨ ardet p ˚a limit s ˚a ¨ ar det dags att ber¨ akna

[r]