SVENSK STANDARD SS-EN ISO 14125
Handläggande organ Fastställd Utgåva Sida
SVENSK MATERIAL- & MEKANSTANDARD, SMS 1998-06-26 1 1 (1+22)
© INNEHÅLLET I SVENSK STANDARD ÄR UPPHOVSRÄTTSLIGT SKYDDAT. SIS HAR COPYRIGHT PÅ SVENSK STANDARD. EFTERTRYCK UTAN TILLSTÅND ÄR FÖRBJUDET
ICS 83.120
Standarder kan beställas hos SIS som även lämnar all- männa upplysningar om svensk och utländsk standard.
Postadress: SIS, Box 6455, 113 82 STOCKHOLM Telefon: 08 - 610 30 00. Telefax: 08 - 30 77 57
Upplysningar om sakinnehållet i standarden lämnas av SMS.
Telefon: 08 - 459 56 00. Telefax: 08 - 667 85 42 E-post: info@sms-standard.se
Prisgrupp Q Tryckt i augusti 1998
Fibre-reinforced plastic compo- sites – Determination of flexural properties (ISO 14125:1998)
The European Standard EN ISO 14125:1998 has the status of a Swedish Standard. This document contains the official English version of EN ISO 14125:1998.
Swedish Standards corresponding to documents referred to in this Standard are listed in ”Catalogue of Swedish Standards”, issued by SIS. The Cata- logue lists, with reference number and year of Swedish approval, International and European Standards approved as Swedish Standards as well as other Swedish Standards.
Plast – Fiberarmerad plast – Be- stämning av hållfasthetsegenska- perna vid böjning (ISO 14125:1998)
Europastandarden EN ISO 14125:1998 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 14125:1998.
Motsvarigheten och aktualiteten i svensk standard till de publikationer som omnämns i denna stan- dard framgår av ”Katalog över svensk standard”, som ges ut av SIS. I katalogen redovisas interna- tionella och europeiska standarder som fastställts som svenska standarder och övriga gällande svenska standarder.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 14125
March 1998
ICS 83.120 Supersedes EN 63:1977
CEN
European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung
Central Secretariat: rue de Stassart 36, B-1050 BRUSSELS
© 1998 CEN All rights of exploitation in any form and by any means reserved
worldwide for CEN national Members Ref. No. EN ISO 14125:1998 E
Descriptors: plastics, reinforced plastics, tests, bend tests, determination, flexural strength, test specimens.
English version
Fibre-reinforced plastic composites – Determination of flexural properties (ISO 14125:1998)
Compostites plastiques renforcés de fibres – Détermination des propriétés de flexion (ISO 14125:1998)
This European Standard was approved by CEN on 15 February 1998.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alternation.
Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standards exists in three official versions (English, French, Ger- man). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
Page 2
EN ISO 14125:1998
Contents Page
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative references ... 6
3 Principle ... 6
4 Definitions ... 7
5 Apparatus ... 8
6 Test specimens ... 10
7 Number of test specimens ... 12
8 Conditioning ... 12
9 Procedure ... 12
10 Calculation and expression of results ... 13
11 Precision ... 16
12 Test report ... 17
Annex A (normative) Other test specimens ... 18
Annex B (normative) Large-deflection corrections – Calculation and expression of results ... 19
Page 3 EN ISO 14125:1998
Page 4
EN ISO 14125:1998
Page 5 EN ISO 14125:1998
Page 6
EN ISO 14125:1998
Page 7 EN ISO 14125:1998
Page 8
EN ISO 14125:1998
Page 9 EN ISO 14125:1998
