• No results found

Design of High-Speed Analog-to-Digital Converters using Low-Accuracy Components

N/A
N/A
Info
Download
Protected

Academic year: 2021

Share "Design of High-Speed Analog-to-Digital Converters using Low-Accuracy Components"

Copied!
1
0
0

Loading.... (view fulltext now)

Download now ( 1 Page )

Full text

(1)

Linköping Studies in Science and Technology Dissertations, No. 1367

Design of High-Speed

Analog-to-Digital Converters

using Low-Accuracy Components

Timmy Sundström

Electronic Devices

Department of Electrical Engineering Linköping University, SE-581 83 Linköping, Sweden

Linköping 2011

Linköping Studies in Science and Technology Dissertations, No. 1367

Design of High-Speed

Analog-to-Digital Converters

using Low-Accuracy Components

Timmy Sundström

Electronic Devices

Department of Electrical Engineering Linköping University, SE-581 83 Linköping, Sweden

Linköping 2011

Timmy Sundström

Design of High-Speed

Analog-to-Digital Converters using Low-Accuracy Components

Linköping 201

References

Download now ( PDF - 1 Page - 911.67 KB )

Related documents

Design of High-Speed Analog-to-Digital Converters using Low-Accuracy Components

An advantage with the pipeline architecture is that it is easy to introduce redundancy, which will significantly reduce the sub-ADC requirements. The transfer function of a

Design of High‐Speed, Low‐Power, Nyquist Analog‐to‐Digital Converters

In Paper I bounds are derived for both flash and pipeline ADCs under the assumption that the accuracy control for comparators and gain stages are managed by digital error

Massive MIMO: Fundamentals and System Designs

Department of Electrical Engineering Linköping University, se-581 83 Linköping,

Entrepreneurship Policy Public Support for Technology-Based Ventures Charlotte Norrman 2008 Department of Management and Engineering Linköping University, SE-581 83 Linköping, Sweden

By analysing the rationales, goals, design and outcomes of public programmes which aim to support TBVs, and by identifying implications for research and for the practical design

On Pose Estimation in Room-Scaled Environments

Department of Electrical Engineering Linköping University. SE-581 83 Linköping,

A Nonlinear Optimization Approach to

1528, 2013 Department of Electrical Engineering. Linköping University SE-581 83

Linköping Studies in Science and Technology Dissertation No. 1823 Department of Computer and Information Science Linköping University SE-581 83 Linköping Sweden Linköping 2017

The studies presented in this thesis are part of a body of research in Resilience Engineering (RE) that in the past decade has developed theories, methods and models, and

Modeling for control of centrifugal compressors

1516, 2013 Department of Electrical Engineering Linköping University.. SE–581 83 Linköping,