_____________________________________________________________________________________________________________________
SÄKERHETSDATABLAD
AVSNITT 1 NAMNET PÅ ÄMNET/BLANDNINGEN OCH
BOLAGET/FÖRETAGET
Detta säkerhetsdatablad är utarbetad för Sverige.
1.1. PRODUKTBETECKNING
Produktnamn: MOBILITH SHC 007
Produktbeskrivning: Syntetisk basolja och additiver
Produktkod: 2015A0204010, 400455, 643569-60
1.2. RELEVANTA IDENTIFIERADE ANVÄNDNINGAR AV ÄMNET ELLER BLANDNINGEN OCH ANVÄNDNINGAR SOM DET AVRÅDS FRÅN
Avsedd användning: Smörjfett
Användningar som det avråds från:: Inga om inte specifikt angetts i annan del av säkerhetsdatabladet.
1.3. NÄRMARE UPPLYSNINGAR OM DEN SOM TILLHANDAHÅLLER SÄKERHETSDATABLAD Leverantör: ExxonMobil Petroleum & Chemical BV
POLDERDIJKWEG B-2030 Antwerpen Belgien
Teknisk produktinformation: (SE) 0200 810 378
Leverantörskontakt:: (SE) 0200 810 378
Säkerhetsdatabladets webbadress: www.msds.exxonmobil.com
E-mail: sdsnorden@exxonmobil.com
Leverantör / Registrant: (BE) +32 3 790 3111
1.4. TELEFONNUMMER FÖR NÖDSITUATIONER
Nödnummer (dygnet runt): +46-(0)8 52503403 (CHEMTREC)
Giftinformationscentralen: 112 eller 010 456 67 00 (Giftinformationscentralen)
Nationellt Produktregistreringsnummer: Sverige 311176-2
AVSNITT 2 FARLIGA EGENSKAPER
2.1. KLASSIFICERING AV ÄMNET ELLER BLANDNINGEN Klassificering enligt förordning (EG) nr 1272/2008 (CLP)
Ej klassificerat
2.2. MÄRKNINGSUPPGIFTER
_____________________________________________________________________________________________________________________
Märkningsuppgifter enligt förordning (EC) 1272/2008
Faroangivelser Kompletterande:
EUH210: Säkerhetsdatablad finns att rekvirera.
EUH208: Innehåller: Nafteniska syror, zinksalter, Benzotriazolderivat Kan orsaka en allergisk reaktion.
2.3. ANDRA FAROR
Fysikaliska / kemiska faror:
Ingen särskilda faror.
Hälsofaror:
Högtrycksinjektion under huden kan orsaka svåra skador. Överdriven exponering kan orsaka ögon, hud- eller andningsirritation.
Miljöfaror:
Ingen särskilda faror.Produkten är inte PBT eller vPvB enligt kriterierna i REACH Annex XIII.
AVSNITT 3 SAMMANSÄTTNING / INFORMATION OM BESTÅNDSDELAR
3.1. ÄMNEN Inte tillämpligt. Denna produkt är en blandning.
3.2. BLANDNINGAR
Detta material är definierat som en blandning.
Ingående ämnen som uppfyller kriterierna för klassificering eller/och med gällande gränsvärde och skall uppges
Namn CAS# EC# Registrering# Koncentration
*
GHS/CLP- klassificering 1H-benzotriazol-1-metanamin, n,n,-bis(2-
etylhexyl)-metyl-
- 939-700-4 01-2119982395-25 0.1 - < 0.25% Aquatic Acute 1 H400 (M factor 1),
Aquatic Chronic 2 H411, Skin Irrit. 2 H315, Skin Sens. 1B H317 Bensenamin, N-fenyl-, reaktionsprodukter
med 2,4,4-trimetylpenten
68411-46-1 270-128-1 01-2119491299-23 1 - < 5% [Aquatic Acute 3 H402], [Skin Irrit. 3 H316]
Nafteniska syror, zinksalter 12001-85-3 234-409-2 01-2120783834-41 0.1 - < 1% [Aquatic Acute 2 H401], Aquatic Chronic 2 H411, Eye Irrit. 2 H319, Skin Sens. 1B H317 Zinkdialkylditiofosfat 68457-79-4 270-608-0 01-2119493628-22 1 - < 2.5% [Aquatic Acute 2 H401],
Aquatic Chronic 2 H411, Skin Irrit. 2 H315, Eye Dam. 1 H318 N.B. - varje klassifikation i parentes är en GHS-byggsten som inte antogs av EU i CLP-förordningen (nr 1272/2008) varför den inte tillämpas i EU eller i sådana icke EU-länder som verkställt CLP-förordningen, och den visas endast för informationsändamål.
_____________________________________________________________________________________________________________________
anm.: Fullständig lydelse av faroangivelserna finns i avsnitt 16
AVSNITT 4 ÅTGÄRDER VID FÖRSTA HJÄLPEN
4.1. BESKRIVNING AV ÅTGÄRDER VID FÖRSTA HJÄLPEN INANDNING
Under normala betingelser och vid avsedd användning förväntas detta material ej utgöra någon inhalationsrisk.
HUDKONTAKT
Tvätta kontaktyta med tvål och vatten Om produkten injiceras i eller under huden eller i någon kroppsdel skall personen omedelbart uppsöka en kirurgmottagning oavsett skadans utseende eller storlek. Även om de första symtomen från högtrycksinjektion kan tyckas små eller utebli kan ett kirurgiskt ingrepp inom de närmaste timmarna vara viktigt för att minska skadans slutliga omfattning.
ÖGONKONTAKT
Spola med rikligt med vatten. Sök medicinsk hjälp om irritation uppträder.
FÖRTÄRING
Första hjälpen behövs normalt inte. Sök medicinsk hjälp om obehag uppstår.
4.2. DE VIKTIGASTE SYMPTOMEN OCH EFFEKTERNA, BÅDE AKUTA OCH FÖRDRÖJDA
Lokal nekros vars tecken är att smärta och vävnadsskador börjar några timmar efter injektionen.
4.3. ANGIVANDE AV OMEDELBAR MEDICINSK BEHANDLING OCH SÄRSKILD BEHANDLING SOM EVENTUELLT KRÄVS
Inget behov av specialutrustning för att tillhandahålla särskild behandling och omedelbar medicinsk behandling förväntas.
AVSNITT 5 BRANDBEKÄMPNINGSÅTGÄRDER
5.1. SLÄCKMEDEL
Lämpliga släckmedel: Använd vattenspray, skum, pulver eller koldioxid (CO2) för att släcka brand.
Olämpliga släckmedel: Direkta vattenstrålar
5.2. SÄRSKILDA FAROR SOM ÄMNET ELLER BLANDNINGEN KAN MEDFÖRA
Farliga förbränningsprodukter: Aldehyder, Oförbrända produkter, Koloxider, Rök, Svaveloxider 5.3. RÅD TILL BRANDBEKÄMPNINGSPERSONAL
Brandbekämpningsinstruktioner: Utrym området. Förhindra att material från brandbekämpning eller utspädning rinner ned i vattendrag, avlopp eller dricksvattentäkter. Brandmän ska använda standard
skyddsutrustning och tryckluftsapparat i trånga utrymmen. Använd vattenspray för att kyla brandexponerade ytor och skydda personal.
BRANDFARLIGHET
_____________________________________________________________________________________________________________________
Flampunkt [Metod]: >204ºC (400ºF) [ETABL. FÖR OLJA, ASTM D-92 (COC)]
Högre/lägre antändningsgränser (Ungefärlig volymprocent i luft): UEL: Data ej tillgängligt LEL:
Data ej tillgängligt
Självantändningstemperatur: Data ej tillgängligt
AVSNITT 6 ÅTGÄRDER VID OAVSIKTLIGA UTSLÄPP
6.1. PERSONLIGA SKYDDSÅTGÄRDER, SKYDDSUTRUSTNING OCH ÅTGÄRDER VID NÖDSITUATIONER RAPPORTERING
Spill och oavsiktliga utsläpp i icke oansenlig mängd skall omdedelbart rapporteras till räddningstjänsten och kommunens miljöskyddskontor.
SKYDDSÅTGÄRDER
Undvik kontakt med utspillt materialet. Se avsnitt 5 - Brandbekämpningsåtgärder. Se avsnitt "Farliga egenskaper" Se avsnitt 4 - Första hjälpen. Se avsnitt 8 för råd om personlig skyddsutrustning. Ytterligare skyddsutrustning kan vara nödvändigt beroende på de specifika omständigheterna och avgörs av experter på plats.
6.2. MILJÖSKYDDSÅTGÄRDER
Förhindra att materialet når vattendrag, avlopp eller lågt liggande områden.
6.3. METODER OCH MATERIAL FÖR INNESLUTNING OCH SANERING
Utsläpp på land: Förhindra fortsatt utsläpp iakttagande normala försiktighetsåtgärder. Skrapa upp utspilld produkt med en skyffel, och lägg i kärl lämpligt för återanvändning eller avyttring.
Utsläpp till vatten: Förhindra fortsatt utsläpp iakttagande normala försiktighetsåtgärder. Begränsa omedelbart utsläppet med länsar. Varna andra fartyg i närheten. Skumma av materialet från ytan.
Dessa rekommendationer är baserade på normala förhållanden, andra hänsyn kan behöva tas pga stark vind, extremt höga/låga temperaturer etc. Det är alltid gällande myndighet (Räddningsverket/kommunala
miljöskyddskontoret/kustbevakningen) som tar slutgiltligt avgörande om korrekt åtgärd i det enskilda fallet.
6.4. HÄNVISNING TILL ANDRA AVSNITT Se avsnitt 8 och 13.
AVSNITT 7 HANTERING OCH LAGRING
7.1. FÖRSIKTIGHETSMÅTT FÖR SÄKER HANTERING
Förhindra smärre spill och läckage för att undvika halkrisk.
Elektrostatisk ackumuleringsfara: Detta material ackumulerar ej statisk laddning.
7.2. FÖRHÅLLANDEN FÖR SÄKER LAGRING, INKLUSIVE EVENTUELL OFÖRENLIGHET
Får ej lagras i öppna eller omärkta fat/behållare. Lagras åtskilt ifrån material angett i avsnitt 10 som bör undvikas.
7.3. SPECIFIK SLUTANVÄNDNING
identifierade användningsområden finns i avsnitt 1. Industri- eller sektorsspecifik vägledning är inte
_____________________________________________________________________________________________________________________
tillgänglig.
AVSNITT 8 BEGRÄNSNING AV EXPONERINGEN / PERSONLIGT SKYDD
8.1. KONTROLLPARAMETRAR
Information om rekommenderade övervakningsmetoder kan fås av:
Arbetsmiljöverket, se deras allmänna råd (AFS 2000:3) standard SS-EN689 (Arbetsplatsluft)
8.2. BEGRÄNSNING AV EXPONERINGEN BEGRÄNSNING AV EXPONERING
Korrekt skydds- och teknisk utrustning varierar beroende på förhållandena på den enskilda arbetsplatsen.
Inga speciella krav vid normala användningsbetingelser och adekvat ventilation.
SKYDDSUTRUSTNING
Valet av personlig skyddsutrustning kan variera beroende på användningsområde, rutiner för hanterande på arbetsplatsen och befintlig ventilation. Rekommendationerna nedan är baserade på för oss kända
hanteringsförhållanden.
Andningsskydd: Om teknisk utrustning inte kan hålla föroreningar under gällande gränsvärde, bör godkänt andningsskydd användas. Val av skydd, användning och underhåll måste följa gällande lagstiftning. För denna produkt rekommenderas följande andningsskydd:
I regel krävs inget skydd vid normala användningsbetingelser och tillräcklig ventilation.
Vid höga koncentrationer skall frisklufts- eller tryckluftsapparat användas.
Handskydd: Nedanstående information är baserad på tillgänglig litteratur samt information ifrån skyddshandsketillverkare. Handskarnas passform och genombrottstid kan variera beroende på
användningsområde. Kontakta handstillverkaren för specifika råd angående handskval och genombrottstider för dina arbetsförhållanden. Kontrollera handskarna regelbundet och kassera omedelbart vid tecken på påverkan.
För denna produkt rekommenderas följande skyddshandskar:
I regel krävs inget skydd under normala användningsbetingelser.
Ögonskydd: Om kontakt med materialet är sannolik rekommenderas skyddsglasögon med sidoskärmar.
Hudskydd: Nedanstående information är baserad på tillgänglig litteratur samt information från tillverkare av skyddsutrustning. För denna produkt rekommenderas följande skydd mot hudkontakt:
Under normalt användningsförfarande krävs som regel inget speciellt hudskydd. Dock bör hudkontakt alltid undvikas i enlighet med god arbetspraxis.
Specifika hygienåtgärder: Iakttag god personlig hygien; tvätta alltid händerna efter att produkten har hanterats samt innan förtäring av mat eller dryck samt före rökning. Tvätta arbetskläderna regelbundet och kassera kläder och skor som inte kan rengöras.
_____________________________________________________________________________________________________________________
MILJÖKONTROLLER
Iakta gällande miljöbestämmelser gällande begränsningar av utsläpp till luft, vatten och jord. Skydda miljön med lämpliga kontrollåtgärder för att förhindra eller begränsa utsläpp.
AVSNITT 9 FYSIKALISKA OCH KEMISKA EGENSKAPER
OBS! De fysiska och kemiska egenskaper som anges nedan är endast avsedda för en säkerhet-hälso- och miljöbedömning,och är inte alltid samma som produkt specifikationen. Kontakta leverantören för ytterligare information.
9.1. INFORMATION OM GRUNDLÄGGANDE FYSIKALISKA OCH KEMISKA EGENSKAPER Fysikaliskt tillstånd: Fast
Form: Halvflytande Färg: Röd
Lukt: Karaktäristisk
Luktgräns: Data ej tillgängligt pH: Inte tekniskt möjligt
Smältpunkt: Inte tekniskt möjligt Fryspunkt: Data ej tillgängligt
Start kokpunkt / och kokområde: Data ej tillgängligt
Flampunkt [Metod]: >204ºC (400ºF) [ETABL. FÖR OLJA, ASTM D-92 (COC)]
Avdunstningshastighet (n-butylacetat = 1): Data ej tillgängligt Brandfarlighet (fast, gas): Inte tekniskt möjligt
Högre/lägre antändningsgränser (Ungefärlig volymprocent i luft): UEL: Data ej tillgängligt LEL:
Data ej tillgängligt
Ångtryck: < 0.013 kPa (0.1 mm Hg) vid 20°C [Uppskattat]
Ångdensitet (Luft=1): Data ej tillgängligt
Relativ densitet (vid 15 ºC): 0.866 [testmetod ej tillgängligt]
Löslighet(er): vatten Försumbar
Fördelningskoefficient (n-oktanol/vatten-fördelningskoefficient):: > 3.5 [Uppskattat]
Självantändningstemperatur: Data ej tillgängligt Sönderfallstemperatur: Data ej tillgängligt
Viskositet: 460 cSt (460 mm2/sec) vid 40°C [testmetod ej tillgängligt]
Explosiva egenskaper: Inga Oxiderande egenskaper: Inga 9.2. ANNAN INFORMATION
Inga
Anmärkning: Majoriteten av ovanstående data gäller för i produkten ingående olje komponenter.
AVSNITT 10 STABILITET OCH REAKTIVITET
10.1. REAKTIVITET: Se underrubrik nedan.
10.2. KEMISK STABILITET: Materialet är stabilt under normala betingelser.
_____________________________________________________________________________________________________________________
10.3. RISKEN FÖR FARLIGA REAKTIONER: Förekommer ej.
10.4. FÖRHÅLLANDEN SOM SKA UNDVIKAS: Extrem hetta. Möjliga antändningskällor.
10.5. OFÖRENLIGA MATERIAL: Starka oxidationsmedel
10.6. FARLIGA SÖNDERDELNINGSPRODUKTER: Produkten bryts inte ner vid normal rumstemperatur.
AVSNITT 11 TOXIKOLOGISK INFORMATION
11.1. INFORMATION OM DE TOXIKOLOGISKA EFFEKTERNA
RiskKlass Slutsats / anmärkningar
Inandning
Akut toxicitet: Ingen slutdata för matrialet Minimal giftighetsgrad. Baserat på komponentanalys.
Irritation: Ingen slutdata för matrialet Låg risk vid hantering i normal rumstemperatur.
FÖRTÄRING
Akut toxicitet: Ingen slutdata för matrialet Minimal giftighetsgrad. Baserat på komponentanalys.
Hud
Akut toxicitet: Ingen slutdata för matrialet Minimal giftighetsgrad. Baserat på komponentanalys.
Hudfrätning/Irritation: Ingen slutdata för matrialet
Låg risk för hudirritation vid normal rumstemperatur. Baserat på komponentanalys.
Öga
Allvarlig ögonskada/Irritation: Ingen slutdata för matrialet
Kan ge en lätt, kortvarig obehagskänsla i ögonen. Baserat på komponentanalys.
Sensibilisering
Andningsallergi: Inga slutpunktsdata för produkten.
Anses inte vara en andningsallergen.
Hudsensibilisering: Inga slutpunktsdata för produkten.
Anses inte vara ett hudsensibiliserande ämne. Baserat på komponentanalys.
Aspiration: Data tillgängliga. Anses inte utgöra kvävningsrisk. På basis av materialets fysikalisk-kemiska egenskaper.
Mutagenicitet i könsceller: Inga slutpunktsdata för produkten.
Anses inte vara en könscellsmutagen. Baserat på komponentanalys.
Carcinogenicitet: Inga slutpunktsdata för produkten.
Väntas inte orsaka cancer. Baserat på komponentanalys.
Reproduktionstoxicitet: Inga slutpunktsdata för produkten.
Anses inte vara ett reproduktionstoxiskt ämne. Baserat på komponentanalys.
Mjölkutsöndring: Inga slutpunktsdata för produkten.
Väntas inte skada spädbarn som ammas.
Specifik toxicitet i målorgan (STOT) Engångsexponering: Inga slutpunktsdata för produkten.
Väntas inte orsaka organskador vid en enda exponering.
Upprepad exponering: Inga slutpunktsdata för produkten.
Väntas inte orsaka organskador vid långvarig eller upprepad exponering. Baserat på komponentanalys.
ANNAN INFORMATION
För produkten::
Komponenternas koncentration i denna formulering förväntas inte ge någon hudsensibilisering, baserat på tester av
_____________________________________________________________________________________________________________________
liknande komponenter eller formuleringar.
Innehåller:
Syntetisk basolja: Förväntas inte ha allvarliga negativa hälsoeffekter vid normalt användande, baserat på
laboratorietester av samma eller liknande produkter. Ej mutagent eller genotoxiskt. Ej allergiframkallande vid tester.
AVSNITT 12 EKOLOGISK INFORMATION
Informationen baseras på data som finns tillgänglig för materialet, komponenter i materialet och liknande material, genom pricipen för överbryggning.
12.1. TOXICITET
Produkten -- Förväntas vara skadligt för vattenorganismer.
12.2. PERSISTENS OCH NEDBRYTBARHET Ej fastställt.
12.3. BIOACKUMULERINGSFÖRMÅGA Ej fastställt.
12.4. RÖRLIGHETEN I JORD
Basoljekomponent -- Låg vattenlöslighet, flyter och förväntas migrera från vatten till land. Förväntas fördelas till jord och sediment.
12.5. ÄMNETS (ÄMNENAS) PERSISTENS, BIOACKUMULATION OCH TOXICITET
Denna produkt innehåller inget ämne som är PBT eller vPvB enligt Reach Annex XIII.
12.6. ANDRA SKADLIGA EFFEKTER Väntas inte orsaka skadliga effekter.
AVSNITT 13 AVFALLSHANTERING
Rekommendationer angående avfallshantering baseras på produkten som den levereras. Omhändertagande måste ske i enlighet med aktuella tillämpliga lagar och produktens skick vid avfallstillfället.
13.1. AVFALLSHANTERINGSMETODER
Produkten är lämplig för förbränning i en av myndigheterna godkänd anläggning, eller avyttring på någon godkänd avfallsanläggning. Lokala regler kring avfallshantering kan förekomma och skall efterföljas.
Europeisk avfallskod: 12 01 12*
OBS! Denna kod har tilldelats med utgångspunkt från de vanligaste användningarna av detta material.
Produktens användning avgör slutgiltlig avfallskod. Användaren bör kontrollera att korrekt kod används i enlighet med avfallsförordningen.
Detta avfall skall hanteras som farligt avfall i enlighet med avfallsförordningen SFS 2011:927, såvida inte undantag ges i nämnda förordning.
TÖMNINGSANVISNING PLÅTFAT:: (Viscositet 100-700cSt vid 40°C): Tomma fat kan återanvändas eller
_____________________________________________________________________________________________________________________
lämnas för rekonditionering alternativt metallåtervinning efter tömning enligt anvisningar i detta avsnitt. Fat som ska lämnas till metallåtervinning måste tömmas omsorgsfullt. Tömningen ska ske vid temperatur högre än 15°C. Vänd det tömda fatet upp och ned, något lutande (ca 10 grader) med sprundet (öppningen) i lägsta position. Låt de sista produktresterna rinna ut och låt fatet vara kvar i samma position i minst 10 minuter efter sista droppen.
VARNING GÄLLANDE TÖMD FÖRPACKNING: Varning för tomma behållare (när tillämpligt): Tomma behållare kan innehålla återstoder och vara farliga. Försök inte fylla behållare på nytt eller rensa dem utan behövliga anvisningar.
Tomma trummor ska torkas helt och lagras på ett säkert sätt tills de repareras på ett ändamålsenligt sätt eller destrueras. Tomma behållare ska tas till återanvändning eller återvinning eller destrueras av ett kompetent eller auktoriserat avfallshanteringsföretag i enlighet med gällande lokala, regionala och nationella föreskrifter. MAN SKA VARKEN TRYCKSÄTTA, SVETSA, LÖDA, SMÄLTA IHOP, BORRA ELLER SLIPA SÅDANA BEHÅLLARE ELLER UTSÄTTA DEM FÖR HETTA, LÅGOR, GNISTOR, STATISK ELEKTRICITET ELLER ANDRA
ANTÄNDNINGSKÄLLOR. DE KAN EXPLODERA OCH ORSAKA SKADA ELLER DÖD.
AVSNITT 14 TRANSPORTINFORMATION
LAND (ADR/RID): 14.1-14.6 Ej klassificerat för vägtransport
INLAND WATERWAYS (ADN) - Ej tillämpligt i Sverige:: 14.1-14.6 Ej klassificerat för inlands vattendrag
SEA (IMDG): 14.1-14.6 Ej klassificerat för sjötransport
SEA (MARPOL 73/78 Convention - Bilaga II):
14.7. Bulktransport i enlighet med bilaga II till MARPOL 73/78 och IBC Code Ej klassificerat enligt Bilaga II
AIR (IATA): 14.1-14.6 Ej klassificerat för flygtransport
AVSNITT 15 GÄLLANDE FÖRESKRIFTER
TILLSYNSSTATUS OCH TILLÄMPLIGA LAGAR OCH FÖRORDNINGAR
Listad eller undantagen från listning i följande kemikalieförteckningar (Kan innehålla ämne(n) som ska anmälas till den federala miljöskyddsmyndighetens (EPA) aktiva TSCA-förteckning före import till USA):
AIIC, IECSC, ISHL, KECI, TCSI, TSCA Specialfall:
Förteckning Status
NDSL Restriktioner förekommer
15.1. FÖRESKRIFTER/LAGSTIFTNING OM ÄMNET ELLER BLANDNINGEN NÄR DET GÄLLER SÄKERHET, HÄLSA OCH MILJÖ
Tillämpliga EU-direktiv och förordningar:
_____________________________________________________________________________________________________________________
1907/2006 [... om registrering, utvärdering, godkännande och begränsning av kemikalier (REACH) ... och dess uppdateringar]
1272/2008 [om klassificering, märkning och förpackning av ämnen och blandningar.. med uppdateringar]
Reach-begränsningar för tillverkning, placering på marknaden och användning av vissa farliga ämnen, blandningar och produkter (bilaga XVII):
Följande uppgifter i bilaga XVII kan komma i fråga för denna produkt: None Produktregistrerad i::
15.2. KEMIKALIESÄKERHETSBEDÖMNING
REACH-information: En kemikaliesäkerhetsbedömning har upprättats för denna produkt eller för ämnen i produkten.
AVSNITT 16 ANNAN INFORMATION
REFERENSER: Källinformation som använts för sammanställning av säkerhetsdatabladet inkluderar en eller flera av följande källor; CONCAWE registreringsdossiers, publikationer från branchorganisationer som EU Hydrocarbon
Solvents REACH Consortium, U.S. HPV Program Robust Summaries, EU IUCLID databas, U.S. NTP publikationer, och andra tillgänliglia källor.
Lista över förkortningar och akronymer som kan användas (men inte nödvändigtvis finns) på detta säkerhetsdatablad:
Akronym Full text
e.t. Ej tillämplig
e.f. Ej fastställd
e.f. Inte fastställd
Flyktig organisk förening (VOC)
Flyktiga organiska föreningar
AIIC Australian Inventory of Industrial Chemicals
AIHA WEEL American Industrial Hygiene Associations gränsvärden för miljöexponering på arbetsplatsen ASTM ASTM International, ursprungligen känd under namnet American Society for Testing and Materials
(ASTM)
DSL Lista över inhemska ämnen (Kanada)
EINECS Förteckning över existerande, kommersiellt använda ämnen ELINCS Europeiska förteckningen över anmälda kemiska ämnen ENCS Befintliga och nya kemiska ämnen (Japansk förteckning) IECSC Förteckningen över existerande kemiska ämnen i Kina KECI Koreanska förteckningen över befintliga kemikalier NDSL Lista över icke inhemska ämnen (Kanada) NZIoC Nya Zeelands förteckning över kemiska ämnen
PICCS Filippinernas förteckning över kemikalier och kemiska ämnen
TLV Tröskelgränsvärde (American Conference of Governmental Industrial Hygienists) TSCA Toxic Substances Control Act (Förenta staternas förteckning)
UVCB Ämnen med okänd eller varierande sammansättning, komplexa reaktionsprodukter eller biologiskt material.
LC Letal koncentration
LD Letal dos
LL Letal belastning
_____________________________________________________________________________________________________________________
EC Effektiv koncentration
EL Belastningeffekt
NOEC NOEC
NOELR Ingen observerad belastningsgradseffekt
Förteckning över faroangivelser (H- koder) som finns i avsnitt 3 av detta säkerhetsdatablad:
Skin Irrit. 2 H315: Irriterar huden; Hudfrätning/irritation, Klass
[Skin Irrit. 3 H316]: Orsakar lindrig hudirritation; Hudfrätning/irritation, Klass Skin Sens. 1 H317: Kan orsaka en allergisk hudreaktion; Hudsensibilisering, Klass Eye Dam. 1 H318: Orsakar allvarliga ögonskador; Allvarliga ögonskador/Irr, Klass Eye Irrit. 2 H319: Orsakar allvarlig ögonirritation; Allvarliga ögonskador/Irr, Klass
Aquatic Acute 1 H400: Mycket giftigt för vattenlevande organismer; Akut miljötoxicitet, Klass [Aquatic Acute 2 H401]: Giftigt för vattenlevande organismer; Akut miljötoxicitet, klass [Aquatic Acute 3 H402]: Skadligt för vattenlevande organismer; Akut miljötoxicitet, Klass
Aquatic Chronic 2 H411: Giftigt för vattenlevande organismer med långtidseffekter; Långvarig miljötoxicitet, Klass
DETTA SÄKERHETSDATABLAD ÄR ENLIGT REVISION::
Avsnitt 03; Sammansättningstabell för REACH information har modifierats.
GHS CLP Kompletterande rapporter information har lagts till.
GHS målorgan fras information har tagits bort.
Avsnitt 01: Företagets prioriteringsordningen på kontakter information har modifierats.
Avsnitt 01: Företagets adress information har modifierats.
Avsnitt 02: GHS Information om allergiframkallande ämne information har lagts till.
Avsnitt 02: GHS Information om allergiframkallande ämne information har tagits bort.
Avsnitt 15: Nationella förteckningar information har modifierats.
Avsnitt 15: REACH bilaga XVII data information har lagts till.
Avsnitt 16: H-kod förteckning information har modifierats.
--- Information och rekommendationer i detta dokument är, enligt ExxonMobils vetskap och kännedom, korrekt och tillförlitlig vid utfärdandedatumet. ExxonMobil kan kontaktas för säkerställande om att detta dokument är det senaste tillgängliga. Informationen och rekommendationerna tillhandahålls för användarens övervägande och kontroll. Det åligger användaren att tillse att produkten är lämplig för avsedd användning. Om köparen packar om denna produkt, är det användarens ansvar att försäkra sig om att korrekt hälso-, säkerhets- och annan nödvändig information finns med eller på förpackningen. Ändring av detta dokument är strikt förbjuden. Förutom i den omfattning som krävs enligt lag, är återpublicering eller -överföring av detta dokument, helt eller delvis, ej tillåtet. Begreppet "ExxonMobil" används för bekvämlighets skull och kan omfatta ett eller flera av ExxonMobil Chemical Company, Exxon Mobil Corporation eller något dotterbolag till vilket dessa bolag direkt eller indirekt har ägarintresse.
--- Endast för internt bruk
MHC: 0B, 0B, 0, 0, 0, 0 FÖRS.ÅTG.: A
DGN: 2010002XSE (553334)
--- Denna produkt är inte klassificerad för hälso- och miljörisker, och ett exponeringsscenario krävs inte. Detta SDS
_____________________________________________________________________________________________________________________
förmedlar lämpliga riskhanteringsåtgärder
BILAGA Bilaga behövs inte för detta material.
_____________________________________________________________________________________________________________________
SAFETY DATA SHEET
SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE
COMPANY / UNDERTAKING
As of the revision date above, this SDS meets the regulations in the United Kingdom & Ireland.
1.1. PRODUCT IDENTIFIER
Product Name: MOBILITH SHC 007
Product Description: Synthetic Base Stocks and Additives Product Code: 2015A0204010, 400455, 643569-60
1.2. RELEVANT IDENTIFIED USES OF THE SUBSTANCE OR MIXTURE AND USES ADVISED AGAINST Intended Use: Grease
Uses advised against: None unless specified elsewhere in this SDS.
1.3. DETAILS OF THE SUPPLIER OF THE SAFETY DATA SHEET Supplier: ExxonMobil Petroleum & Chemical BV
POLDERDIJKWEG B-2030 Antwerpen Belgium
Product Technical Information: (UK) 0800 028 2851 / (IE) 1800 882 024 Supplier General Contact: (UK) 0800 028 2851 / (IE) 1800 882 024
SDS Internet Address: www.msds.exxonmobil.com
E-Mail: sds.uk@exxonmobil.com
Supplier / Registrant: (BE) +32 3 790 3111
1.4. EMERGENCY TELEPHONE NUMBER
24 Hour Emergency Telephone: (UK) (+44) 870 8200418 / (IE) (+353) 19014670
National Poison Control Centre: (UK) 111 / (IE) (+353)1 809 2166
SECTION 2 HAZARDS IDENTIFICATION
2.1. CLASSIFICATION OF SUBSTANCE OR MIXTURE Classification according to Regulation (EC) No 1272/2008
Not Classified
2.2. LABEL ELEMENTS
Label elements according to Regulation (EC) No 1272/2008
_____________________________________________________________________________________________________________________
Hazard Statements:
Supplemental:
EUH210: Safety data sheet available on request.
EUH208: Contains: NAPHTHENIC ACIDS, ZINC SALTS, BENZOTRIAZOLE DERIVATIVE May produce an allergic reaction.
2.3. OTHER HAZARDS
Physical / Chemical Hazards:
No significant hazards.
Health Hazards:
High-pressure injection under skin may cause serious damage. Excessive exposure may result in eye, skin, or respiratory irritation.
Environmental Hazards:
No significant hazards.Material does not meet the criteria for PBT or vPvB in accordance with REACH Annex XIII.
SECTION 3 COMPOSITION / INFORMATION ON INGREDIENTS
3.1. SUBSTANCES Not Applicable. This material is regulated as a mixture.
3.2. MIXTURES
This material is defined as a mixture.
Reportable hazardous substance(s) complying with the classification criteria and/or with an exposure limit (OEL)
Name CAS# EC# Registration# Concentration
*
GHS/CLP classification 1H-BENZOTRIAZOLE-1-METHANAMINE,
N,N-BIS(2-ETHYLHEXYL)-METHYL-
- 939-700-4 01-2119982395-25 0.1 - < 0.25% Aquatic Acute 1 H400 (M factor 1),
Aquatic Chronic 2 H411, Skin Irrit. 2 H315, Skin Sens. 1B H317 BENZENAMINE, N-PHENYL-, REACTION
PRODUCTS WITH 2,4,4- TRIMETHYLPENTENE
68411-46-1 270-128-1 01-2119491299-23 1 - < 5% [Aquatic Acute 3 H402], [Skin Irrit. 3 H316]
NAPHTHENIC ACIDS, ZINC SALTS 12001-85-3 234-409-2 01-2120783834-41 0.1 - < 1% [Aquatic Acute 2 H401], Aquatic Chronic 2 H411, Eye Irrit. 2 H319, Skin Sens. 1B H317 ZINC DIALKYL DITHIOPHOSPHATE 68457-79-4 270-608-0 01-2119493628-22 1 - < 2.5% [Aquatic Acute 2 H401],
Aquatic Chronic 2 H411, Skin Irrit. 2 H315, Eye Dam. 1 H318 Note - any classification in brackets is a GHS building block that was not adopted by the EU in the CLP regulation (No 1272/2008) and therefore is not applicable in the EU or in non-EU countries which have implemented the CLP regulation and is shown for informational purposes only.
_____________________________________________________________________________________________________________________
Note: See SDS Section 16 for full text of hazard statements.
SECTION 4 FIRST AID MEASURES
4.1. DESCRIPTION OF FIRST AID MEASURES INHALATION
Under normal conditions of intended use, this material is not expected to be an inhalation hazard.
SKIN CONTACT
Wash contact areas with soap and water. If product is injected into or under the skin, or into any part of the body, regardless of the appearance of the wound or its size, the individual should be evaluated immediately by a physician as a surgical emergency. Even though initial symptoms from high pressure injection may be
minimal or absent, early surgical treatment within the first few hours may significantly reduce the ultimate extent of injury.
EYE CONTACT
Flush thoroughly with water. If irritation occurs, get medical assistance.
INGESTION
First aid is normally not required. Seek medical attention if discomfort occurs.
4.2. MOST IMPORTANT SYMPTOMS AND EFFECTS, BOTH ACUTE AND DELAYED
Local necrosis as evidenced by delayed onset of pain and tissue damage a few hours after injection.
4.3. INDICATION OF ANY IMMEDIATE MEDICAL ATTENTION AND SPECIAL TREATMENT NEEDED
The need to have special means for providing specific and immediate medical treatment available in the workplace is not expected.
SECTION 5 FIRE FIGHTING MEASURES
5.1. EXTINGUISHING MEDIA
Suitable Extinguishing Media: Use water fog, foam, dry chemical or carbon dioxide (CO2) to extinguish flames.
Unsuitable Extinguishing Media: Straight streams of water 5.2. SPECIAL HAZARDS ARISING FROM THE SUBSTANCE OR MIXTURE
Hazardous Combustion Products: Aldehydes, Incomplete combustion products, Oxides of carbon, Smoke, Fume, Sulphur oxides
5.3. ADVICE FOR FIRE FIGHTERS
Fire Fighting Instructions: Evacuate area. Prevent run-off from fire control or dilution from entering streams, sewers or drinking water supply. Fire-fighters should use standard protective equipment and in enclosed spaces, self-contained breathing apparatus (SCBA). Use water spray to cool fire exposed surfaces and to protect personnel.
_____________________________________________________________________________________________________________________
FLAMMABILITY PROPERTIES
Flash Point [Method]: >204°C (400°F) [EST. FOR OIL, ASTM D-92 (COC)]
Upper/Lower Flammable Limits (Approximate volume % in air): UEL: No data available LEL: No data available
Autoignition Temperature: No data available
SECTION 6 ACCIDENTAL RELEASE MEASURES
6.1. PERSONAL PRECAUTIONS, PROTECTIVE EQUIPMENT AND EMERGENCY PROCEDURES NOTIFICATION PROCEDURES
In the event of a spill or accidental release, notify relevant authorities in accordance with all applicable regulations.
PROTECTIVE MEASURES
Avoid contact with spilled material. See Section 5 for fire fighting information. See the Hazard Identification Section for Significant Hazards. See Section 4 for First Aid Advice. See Section 8 for advice on the minimum requirements for personal protective equipment. Additional protective measures may be necessary, depending on the specific circumstances and/or the expert judgment of the emergency responders.
6.2. ENVIRONMENTAL PRECAUTIONS
Prevent entry into waterways, sewers, basements or confined areas.
6.3. METHODS AND MATERIAL FOR CONTAINMENT AND CLEANING UP
Land Spill: Stop leak if you can do so without risk. Scrape up spilled material with shovels into a suitable container for recycle or disposal.
Water Spill: Stop leak if you can do so without risk. Confine the spill immediately with booms. Warn other shipping. Skim from surface
Water spill and land spill recommendations are based on the most likely spill scenario for this material;
however, geographic conditions, wind, temperature, (and in the case of a water spill) wave and current direction and speed may greatly influence the appropriate action to be taken. For this reason, local experts should be consulted. Note: Local regulations may prescribe or limit action to be taken.
6.4. REFERENCES TO OTHER SECTIONS See Sections 8 and 13.
SECTION 7 HANDLING AND STORAGE
7.1. PRECAUTIONS FOR SAFE HANDLING
Prevent small spills and leakage to avoid slip hazard.
Static Accumulator: This material is not a static accumulator.
7.2. CONDITIONS FOR SAFE STORAGE, INCLUDING ANY INCOMPATIBILITIES
Do not store in open or unlabelled containers. Keep away from incompatible materials.
_____________________________________________________________________________________________________________________
7.3. SPECIFIC END USES
Section 1 informs about identified end-uses. No industrial or sector specific guidance available.
SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION
8.1. CONTROL PARAMETERS
Note: Information about recommended monitoring procedures can be obtained from the relevant agency(ies)/institute(s):
UK Health and Safety Executive (HSE)
8.2. EXPOSURE CONTROLS ENGINEERING CONTROLS
The level of protection and types of controls necessary will vary depending upon potential exposure conditions.
Control measures to consider:
No special requirements under ordinary conditions of use and with adequate ventilation.
PERSONAL PROTECTION
Personal protective equipment selections vary based on potential exposure conditions such as applications, handling practices, concentration and ventilation. Information on the selection of protective equipment for use with this material, as provided below, is based upon intended, normal usage.
Respiratory Protection: If engineering controls do not maintain airborne contaminant concentrations at a level which is adequate to protect worker health, an approved respirator may be appropriate. Respirator selection, use, and maintenance must be in accordance with regulatory requirements, if applicable. Types of respirators to be considered for this material include:
No protection is ordinarily required under normal conditions of use and with adequate ventilation.
For high airborne concentrations, use an approved supplied-air respirator, operated in positive pressure mode.
Supplied air respirators with an escape bottle may be appropriate when oxygen levels are inadequate, gas/vapour warning properties are poor, or if air purifying filter capacity/rating may be exceeded.
Hand Protection: Any specific glove information provided is based on published literature and glove
manufacturer data. Glove suitability and breakthrough time will differ depending on the specific use conditions.
Contact the glove manufacturer for specific advice on glove selection and breakthrough times for your use conditions. Inspect and replace worn or damaged gloves. The types of gloves to be considered for this material include:
No protection is ordinarily required under normal conditions of use.
Eye Protection: If contact is likely, safety glasses with side shields are recommended.
Skin and Body Protection: Any specific clothing information provided is based on published literature or manufacturer data. The types of clothing to be considered for this material include:
No skin protection is ordinarily required under normal conditions of use. In accordance with good industrial hygiene practices, precautions should be taken to avoid skin contact.
_____________________________________________________________________________________________________________________
Specific Hygiene Measures: Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. Discard contaminated clothing and footwear that cannot be cleaned. Practice good housekeeping.
ENVIRONMENTAL CONTROLS
Comply with applicable environmental regulations limiting discharge to air, water and soil. Protect the environment by applying appropriate control measures to prevent or limit emissions.
SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES
Note: Physical and chemical properties are provided for safety, health and environmental considerations only and may not fully represent product specifications. Contact the Supplier for additional information.
9.1. INFORMATION ON BASIC PHYSICAL AND CHEMICAL PROPERTIES Physical State: Solid
Form: Semi-fluid Colour: Red
Odour: Characteristic
Odour Threshold: No data available pH: Not technically feasible
Melting Point: Not technically feasible Freezing Point: No data available
Initial Boiling Point / and Boiling Range: No data available
Flash Point [Method]: >204°C (400°F) [EST. FOR OIL, ASTM D-92 (COC)]
Evaporation Rate (n-butyl acetate = 1): No data available Flammability (Solid, Gas): Not technically feasible
Upper/Lower Flammable Limits (Approximate volume % in air): UEL: No data available LEL: No data available
Vapour Pressure: < 0.013 kPa (0.1 mm Hg) at 20 °C [Estimated]
Vapour Density (Air = 1): No data available
Relative Density (at 15 °C): 0.866 [test method unavailable]
Solubility(ies): water Negligible
Partition coefficient (n-Octanol/Water Partition Coefficient): > 3.5 [Estimated]
Autoignition Temperature: No data available Decomposition Temperature: No data available
Viscosity: 460 cSt (460 mm2/sec) at 40ºC [test method unavailable]
Explosive Properties: None Oxidizing Properties: None 9.2. OTHER INFORMATION
None
NOTE: Most physical properties above are for the oil component in the material.
_____________________________________________________________________________________________________________________
SECTION 10 STABILITY AND REACTIVITY
10.1. REACTIVITY: See sub-sections below.
10.2. CHEMICAL STABILITY: Material is stable under normal conditions.
10.3. POSSIBILITY OF HAZARDOUS REACTIONS: Will not occur.
10.4. CONDITIONS TO AVOID: Excessive heat. High energy sources of ignition.
10.5. INCOMPATIBLE MATERIALS: Strong oxidisers
10.6. HAZARDOUS DECOMPOSITION PRODUCTS: Material does not decompose at ambient temperatures.
SECTION 11 TOXICOLOGICAL INFORMATION
11.1. INFORMATION ON TOXICOLOGICAL EFFECTS
Hazard Class Conclusion / Remarks
Inhalation
Acute Toxicity: No end point data for material.
Minimally Toxic. Based on assessment of the components.
Irritation: No end point data for material. Negligible hazard at ambient/normal handling temperatures.
Ingestion
Acute Toxicity: No end point data for material.
Minimally Toxic. Based on assessment of the components.
Skin
Acute Toxicity: No end point data for material.
Minimally Toxic. Based on assessment of the components.
Skin Corrosion/Irritation: No end point data for material.
Negligible irritation to skin at ambient temperatures. Based on assessment of the components.
Eye
Serious Eye Damage/Irritation: No end point data for material.
May cause mild, short-lasting discomfort to eyes. Based on assessment of the components.
Sensitisation
Respiratory Sensitization: No end point data for material.
Not expected to be a respiratory sensitizer.
Skin Sensitization: No end point data for material.
Not expected to be a skin sensitizer. Based on assessment of the components.
Aspiration: Data available. Not expected to be an aspiration hazard. Based on physico- chemical properties of the material.
Germ Cell Mutagenicity: No end point data for material.
Not expected to be a germ cell mutagen. Based on assessment of the components.
Carcinogenicity: No end point data for material.
Not expected to cause cancer. Based on assessment of the components.
Reproductive Toxicity: No end point data for material.
Not expected to be a reproductive toxicant. Based on assessment of the components.
Lactation: No end point data for material. Not expected to cause harm to breast-fed children.
Specific Target Organ Toxicity (STOT)
_____________________________________________________________________________________________________________________
Single Exposure: No end point data for material.
Not expected to cause organ damage from a single exposure.
Repeated Exposure: No end point data for material.
Not expected to cause organ damage from prolonged or repeated exposure. Based on assessment of the components.
OTHER INFORMATION
For the product itself:
Component concentrations in this formulation would not be expected to cause skin sensitization, based on tests of the components, this formulation, or similar formulations.
Contains:
Synthetic base oils: Not expected to cause significant health effects under conditions of normal use, based on laboratory studies with the same or similar materials. Not mutagenic or genotoxic. Not sensitising in test animals and humans.
SECTION 12 ECOLOGICAL INFORMATION
The information given is based on data for the material, components of the material, or for similar materials, through the application of bridging principals.
12.1. TOXICITY
Material -- Expected to be harmful to aquatic organisms.
12.2. PERSISTENCE AND DEGRADABILITY Not determined.
12.3. BIOACCUMULATIVE POTENTIAL Not determined.
12.4. MOBILITY IN SOIL
Base oil component -- Low solubility and floats and is expected to migrate from water to the land.
Expected to partition to sediment and wastewater solids.
12.5. PERSISTENCE, BIOACCUMULATION AND TOXICITY FOR SUBSTANCE(S) Material does not meet the Reach Annex XIII criteria for PBT or vPvB.
12.6. OTHER ADVERSE EFFECTS No adverse effects are expected.
SECTION 13 DISPOSAL CONSIDERATIONS
Disposal recommendations based on material as supplied. Disposal must be in accordance with current applicable laws and regulations, and material characteristics at time of disposal.
13.1. WASTE TREATMENT METHODS
Product is suitable for burning in an enclosed controlled burner for fuel value or disposal by supervised incineration at very high temperatures to prevent formation of undesirable combustion products.
European Waste Code: 12 01 12*
_____________________________________________________________________________________________________________________
NOTE: These codes are assigned based upon the most common uses for this material and may not reflect contaminants resulting from actual use. Waste producers need to assess the actual process used when generating the waste and its contaminants in order to assign the proper waste disposal code(s).
This material is considered as hazardous waste pursuant to Directive 91/689/EEC on hazardous waste, and subject to the provisions of that Directive unless Article 1(5) of that Directive applies.
Empty Container Warning Empty Container Warning (where applicable): Empty containers may contain residue and can be dangerous. Do not attempt to refill or clean containers without proper instructions. Empty drums should be completely drained and safely stored until appropriately reconditioned or disposed. Empty containers should be taken for recycling, recovery, or disposal through suitably qualified or licensed contractor and in accordance with governmental regulations. DO NOT PRESSURISE, CUT, WELD, BRAZE, SOLDER, DRILL, GRIND, OR EXPOSE SUCH CONTAINERS TO HEAT, FLAME, SPARKS, STATIC ELECTRICITY, OR OTHER SOURCES OF IGNITION.
THEY MAY EXPLODE AND CAUSE INJURY OR DEATH.
SECTION 14 TRANSPORT INFORMATION
LAND (ADR/RID): 14.1-14.6 Not Regulated for Land Transport
INLAND WATERWAYS (ADN): 14.1-14.6 Not Regulated for Inland Waterways Transport
SEA (IMDG): 14.1-14.6 Not Regulated for Sea Transport according to IMDG-Code
SEA (MARPOL 73/78 Convention - Annex II):
14.7. Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code Not classified according to Annex II
AIR (IATA): 14.1-14.6 Not Regulated for Air Transport
SECTION 15 REGULATORY INFORMATION
REGULATORY STATUS AND APPLICABLE LAWS AND REGULATIONS
Listed or exempt from listing/notification on the following chemical inventories (May contain
substance(s) subject to notification to the EPA Active TSCA inventory prior to import to USA): AIIC, IECSC, ISHL, KECI, TCSI, TSCA
Special Cases:
Inventory Status
NDSL Restrictions Apply
15.1. SAFETY, HEALTH AND ENVIRONMENTAL REGULATIONS/LEGISLATION SPECIFIC FOR THE SUBSTANCE OR MIXTURE
_____________________________________________________________________________________________________________________
Applicable EU Directives and Regulations:
1907/2006 [... on the Registration, Evaluation, Authorisation and Restriction of Chemicals ...
and amendments thereto]
1272/2008 [on classification, labelling and packaging of substances and mixtures.. and amendments thereto]
REACH Restrictions on the manufacturing, placing on the market and use of certain dangerous substances, mixtures and articles (Annex XVII):
The following entries of Annex XVII may be considered for this product: None
15.2. CHEMICAL SAFETY ASSESSMENT
REACH Information: A Chemical Safety Assessment has been carried out for one or more substances present in the material.
SECTION 16 OTHER INFORMATION
REFERENCES: Sources of information used in preparing this SDS included one or more of the following: results from in house or supplier toxicology studies, CONCAWE Product Dossiers, publications from other trade associations, such as the EU Hydrocarbon Solvents REACH Consortium, U.S. HPV Program Robust Summaries, the EU IUCLID Data Base, U.S. NTP publications, and other sources, as appropriate.
List of abbreviations and acronyms that could be (but not necessarily are) used in this safety data sheet:
Acronym Full text
N/A Not applicable
N/D Not determined
NE Not established
VOC Volatile Organic Compound
AIIC Australian Inventory of Industrial Chemicals
AIHA WEEL American Industrial Hygiene Association Workplace Environmental Exposure Limits
ASTM ASTM International, originally known as the American Society for Testing and Materials (ASTM) DSL Domestic Substance List (Canada)
EINECS European Inventory of Existing Commercial Substances ELINCS European List of Notified Chemical Substances
ENCS Existing and new Chemical Substances (Japanese inventory) IECSC Inventory of Existing Chemical Substances in China
KECI Korean Existing Chemicals Inventory NDSL Non-Domestic Substances List (Canada) NZIoC New Zealand Inventory of Chemicals
PICCS Philippine Inventory of Chemicals and Chemical Substances
TLV Threshold Limit Value (American Conference of Governmental Industrial Hygienists) TSCA Toxic Substances Control Act (U.S. inventory)
UVCB Substances of Unknown or Variable composition, Complex reaction products or Biological materials
LC Lethal Concentration
LD Lethal Dose
LL Lethal Loading
EC Effective Concentration
EL Effective Loading
_____________________________________________________________________________________________________________________
NOEC No Observable Effect Concentration NOELR No Observable Effect Loading Rate
KEY TO THE H-CODES CONTAINED IN SECTION 3 OF THIS DOCUMENT (for information only):
Skin Irrit. 2 H315: Causes skin irritation; Skin Corr/Irritation, Cat 2 [Skin Irrit. 3 H316]: Causes mild skin irritation; Skin Corr/Irritation, Cat 3 Skin Sens. 1 H317: May cause allergic skin reaction; Skin Sensitization, Cat 1 Eye Dam. 1 H318: Causes serious eye damage; Serious Eye Damage/Irr, Cat 1 Eye Irrit. 2 H319: Causes serious eye irritation; Serious Eye Damage/Irr, Cat 2 Aquatic Acute 1 H400: Very toxic to aquatic life; Acute Env Tox, Cat 1
[Aquatic Acute 2 H401]: Toxic to aquatic life; Acute Env Tox, Cat 2 [Aquatic Acute 3 H402]: Harmful to aquatic life; Acute Env Tox, Cat 3
Aquatic Chronic 2 H411: Toxic to aquatic life with long lasting effects; Chronic Env Tox, Cat 2
THIS SAFETY DATA SHEET CONTAINS THE FOLLOWING REVISIONS:
Composition: Component Table for REACH information was modified.
GHS CLP Supplemental Statements information was added.
GHS Target Organ Phrase information was deleted.
Section 01: Company Contact Methods information was modified.
Section 01: Company Emergency Contact information was modified.
Section 01: Company Mailing Address information was modified.
Section 02: GHS Sensitizer Statement information was added.
Section 02: GHS Sensitizer Statement information was deleted.
Section 15: National Chemical Inventory Listing information was modified.
Section 15: REACH Annex XVII data information was added.
Section 16: HCode Key information was modified.
---
The information and recommendations contained herein are, to the best of ExxonMobil's knowledge and belief, accurate and reliable as of the date issued. You can contact ExxonMobil to insure that this document is the most current
available from ExxonMobil. The information and recommendations are offered for the user's consideration and examination. It is the user's responsibility to satisfy itself that the product is suitable for the intended use. If buyer repackages this product, it is the user's responsibility to insure proper health, safety and other necessary information is included with and/or on the container. Appropriate warnings and safe-handling procedures should be provided to handlers and users. Alteration of this document is strictly prohibited. Except to the extent required by law, re-
publication or retransmission of this document, in whole or in part, is not permitted. The term, "ExxonMobil" is used for convenience, and may include any one or more of ExxonMobil Chemical Company, Exxon Mobil Corporation, or any affiliates in which they directly or indirectly hold any interest.
--- Internal Use Only
MHC: 0B, 0B, 0, 0, 0, 0 PPEC: A
DGN: 2010002XGB (553334)
--- This product is not classified for human health and environmental hazards, and an exposure scenario is not required.
_____________________________________________________________________________________________________________________
This SDS conveys the appropriate risk management measures.
ANNEX Annex not required for this material.