• No results found

Request for tender for grid connection of power-generating facilities

N/A
N/A
Protected

Academic year: 2022

Share "Request for tender for grid connection of power-generating facilities"

Copied!
2
0
0

Loading.... (view fulltext now)

Full text

(1)

Request for tender for grid

connection of power-generating facilities

We request a tender for grid connection of a power-generating facility as specified:

Category: ☐ Wind ☐ Sola ☐ Hydro ☐ Other:      

Location:       (Map with SWEREF99 coordinates (RT90-format) shall be attached) Manufacturer:       Type:      

Number of units:      

Total subscribed power):       kW

Power-generating facility reference power (Pref ):       kW/unit

Maximum power production Pmax (10-minute average value):       kW/unit

Maximum power production (0.2-second average value):       kW/unit

 Use of reactive power at rated voltage::

- Idling:       kW/unit

- At reference power with compensation:       kW/unit - At reference power without compensation:       kW/unit

Maximum use of reactive power at measurement

point during operation (10-minute average value):       kW/unit

Generating facility rated voltage:       V

Generating facility rated power:       MVA

Documentation and information that shall be appended (mandatory)

 Voltage level for specified test values

 ame of the owner of the installation

 Measure report (type test) showing the phase- or main-voltages before and during at least 3 following disconnecting cycles

 List of safety functions with function levels and function times

 For harmonic orders 2-50, output power giving maximal harmonic current and the amplitude of the maximal harmonic current (to be specified in the table on next page)

 Maximum total harmonic current

 Supplementary information for compensation of reactive power for the whole installation

 Dynamic data1

1 If applicable

Short circuit angle (Ψk) 30˚ 50˚ 70˚ 85˚

Voltage change factor (kn) ≤                         Flicker step factor (kf) ≤                        

Version 2.0 ENG | 2020-12-10 1 (2)

(2)

Specification of harmonic currents

Order Output power kW

Harmonic current

% of In Order Output power

kW

Harmonic current

% of In

2             3            

4             5            

6             7            

8             9            

10             11            

12             13            

14             15            

16             17            

18             19            

20             21            

22             23            

24             25            

26             27            

28             29            

30             31            

32             33            

34             35            

36             37            

38             39            

40             41            

42             43            

44             45            

46             47            

48             49            

50            

Maximum rms total harmonic current expressed as % of In      

Output power (kW) at maximum rms total harmonic current      

Maximum rms total discrete inter-harmonic current expressed as % of In       Output power (kW) at maximum rms discrete inter-harmonic current      

Date: Signed: ___________________________________________________________

Name in block letters:      

Supplier of power-generation facility

Date: Signed: ___________________________________________________________

Name in block letters:      

Owner of power-generation facility

Version 2.0 ENG | 2020-12-10 2 (2)

References

Related documents

Electric Power System, Load flow, Voltage Stability, Hydropower,

Therefore, after investigating the wave climate in Kilifi and introducing the idea of utilizing WECs as potential power supplier, the following steps would proceed: Full description

illustrated in Figure 30 and the highest values of plastic strain in Figure 31.. a) Stress, S33, compression side. c) Plastic st rain, PE33, compression side. d) Plastic

Sida 1 av 2 The Registration concerns an inverter for a type A power-generating facility which must meet all requirements of Commission Regulation (EU) 2016/631 establishing a

The reactive power flow on feeder 2 is almost the same for this case and the base case because in both scenario 1 and 2 there is almost no PV generation and therefore almost no

The marine substation is connected to the subsea power cable with the contactor B P CC , and the connection of the sea cable to the onshore grid is done with the contactors B damp and

Gas turbines operate on the Joule-Brayton cycle which is made up of four processes. Adiabatic compression followed by heat addition at constant pressure, an adiabatic

Förslag på ersättnings- produkter i form av likriktare och batterier lades fram till arbetsgivarna för att skapa en standard för Roslagbanans kraftförsörjning