Fullerene-like CNx and CPx Thin Films;Synthesis, Modeling, and Applications

In quest for a deeper understanding on the synthesis and properties of carbon-based thin films prepared by high power impulse magnetron sputtering and with the aim to set, both,

The main contribution of this study on the effect of nitrogen on corrosion be- havior could provide material-level information to design nitrogen-containing multicomponent

thin films by DC magnetron sputtering. Although deposition methods are for the two films similar, a significant difference lies in the method of incorporation of phosphorus

By employing high-resolution transmission electron microscopy (HR-TEM) with selected area electron diffraction (SAED) and pair distribution function (PDF) analysis, X-ray

Note that metals have high thermal conductivity and very low Seebeck coefficient values and insulators (like glass) have almost no electrical conductivity, thus the power

Department of Physics, Chemistry and Biology (IFM) Linköping University. SE-581 83

tion is shown in Fig. Both the FF and SH amplitudes are seen to display a localized central peak with damped oscillations on either side. The respective spectra also exhibit a

We have synthesized epitaxial Zr 2 Al 3 C 4 thin films by pulsed cathodic arc deposition from three elemental cathodes, and have studied the effect of incident atomic flux