Full text
Linköping Studies in Science and Technology Dissertation No. 1677
Linköping Studies in Science and Technology, No. 1677, 2015 Division of Energy Systems
Department of Management and Engineering Linköping University
se-581 83 Linköping, Sweden
Related documents
First, a literature review was done for a basic overview of the terminology and theories about the building insulation, building indoor environment, including
We could also see that Energy Declarations and Energy Auditing in Large Companies mandatory policies were followed, but that the policies by themselves were not very
[c] Look from the operation, Cavity Insulation system can improve the construction speed, relative to the external wall insulation, it can protect the internal
The results show that light coming from sideways (from the facade glazing) was orientation sensitive as changing the orientation of the building led to a significant increase in
As Eurocode allows the use of steels grades up too S700 and the expansion in methods used for handeling weak areas areas, higher steel strength are prone to have a spot in one way
a) Increase vertical wall high (200 mm more) with adding a concrete slab in order to solve the distances that are going to be created between wall coronation and the new sloped
A SEM-EDX (SEM-Inspect S50) was used to study the variation of different crystal structures and crystal growth of calcium carbonate scaling on various surfaces (stainless
RQ1: How the mechanical properties of stainless steel (316L and 304) are influenced if the sample is exposed to a high strain rate after charging with hydrogen.. RQ2: How will the
