• No results found

SVENSK STANDARD SS-EN ISO 105-Z05

N/A
N/A
Protected

Academic year: 2022

Share "SVENSK STANDARD SS-EN ISO 105-Z05"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

(1)

SVENSK STANDARD SS-EN ISO 105-Z05

Handläggande organ Fastställd Utgåva Sida

Allmänna Standardiseringsgruppen, STG 1998-07-31 1 1 (1+15)

© INNEHÅLLET I SVENSK STANDARD ÄR UPPHOVSRÄTTSLIGT SKYDDAT. SIS HAR COPYRIGHT PÅ SVENSK STANDARD. EFTERTRYCK UTAN TILLSTÅND ÄR FÖRBJUDET.

ICS 59.080.01

Standarder kan beställas hos SIS som även lämnar all- männa upplysningar om svensk och utländsk standard.

Postadress: SIS, Box 6455, 113 82 STOCKHOLM Telefon: 08 - 610 30 00. Telefax: 08 - 30 77 57

Upplysningar om sakinnehållet i standarden lämnas av STG.

Telefon: 08 – 13 62 50. Telefax: 08 - 618 61 28 E-post: info@stg.se

Prisgrupp P Tryckt i september 1998

Textiles – Tests for colour fastness – Part Z05: Determination of the

dusting behaviour of dyes (ISO 105-Z05:1996)

The European Standard EN ISO 105-Z05:1998 has the status of a Swedish Standard. This document contains the official English version of EN ISO 105-Z05:1998.

Swedish Standards corresponding to documents re- ferred to in this Standard are listed in ”Catalogue of Swedish Standards”, issued by SIS. The Catalogue lists, with reference number and year of Swedish ap- proval, International and European Standards ap- proved as Swedish Standards as well as other Swed- ish Standards.

Textil – Färghärdighetsprovning – Del Z05: Bestämning av färgämnens dammighetsbeteende

(ISO 105-Z03:1996)

Europastandarden EN ISO 105-Z05:1998 gäller som svensk standard. Detta dokument innehåller den offi- ciella engelska versionen av EN ISO 105-Z05:1998.

Motsvarigheten och aktualiteten i svensk standard till de publikationer som omnämns i denna standard framgår av ”Katalog över svensk standard”, som ges ut av SIS. I katalogen redovisas internationella och europeiska standarder som fastställts som svenska standarder och övriga gällande svenska standarder.

(2)
(3)

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM

EN ISO 105-Z05

March 1998

ICS 59.080.01

CEN

European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung

Central Secretariat: rue de Stassart 36, B-1050 BRUSSELS

© 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

Ref. No. EN ISO 105-Z05:1998 E

Descriptors: textiles, dyeing, colour fastness, powdery materials, dyes, tests, colour-fastness tests, determination, properties.

English version

Textiles – Tests for colour fastness – Part Z05: Determination of the dusting behaviour of dyes (ISO 105-Z05:1996)

Textiles – Essais de solidité des teintures – Partie Z05: Détermination du comportement des colorants au saupoudrage (ISO 105-Z05:

1996)

Textilien – Farbechtheitsprüfungen – Teil Z05:

Bestimmung des Staubverhaltens von Farbstoffen (ISO 105-Z05:1996)

This European Standard was approved by CEN on 14 February 1998.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.

Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German).

A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

(4)

Page 2

EN ISO 105-Z05:1998

(5)

Page 3 EN ISO 105-Z05:1998

(6)

Page 4

EN ISO 105-Z05:1998

(7)

Page 5 EN ISO 105-Z05:1998

(8)

Page 6

EN ISO 105-Z05:1998

References

Related documents

– ISO 11125-2, som oförändrad överförts till svensk standard SS-EN ISO 11125-2 Behand- ling av stålytor före beläggning med målnings- färg och liknande produkter –

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 6: Determination of

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which

The text of the International Standard ISO 683-17:1999 has been prepared by Technical Committee ISO/TC 17 ”Steel” in collaboration with Technical Committee ECISS/TC 23, ”Steels for

This part of ISO 3864 gives principles, criteria and guidance for the design of graphical symbols for use in safety signs as defined in ISO 3864-1, and for the safety sign element

This document specifies a rapid procedure for the simultaneous determination of 2-MCPD esters (bound 2-MCPD), 3-MCPD esters (bound 3-MCPD) and glycidyl esters (bound glycidol) in