• No results found

850 mm Seat height

N/A
N/A
Protected

Academic year: 2022

Share "850 mm Seat height"

Copied!
1
0
0

Loading.... (view fulltext now)

Full text

(1)

MEASUREMENT AND PERFORMANCE

Length

. . . .

1220 mm Width

. . . .

670 mm Minimum transport length

. . . .

850 mm Seat height

. . . .

565 mm Seat height with electric seat elevator

. . . .

565-765 mm**

Weight incl. batteries

. . . .

145 kg Battery capacity

. . . .

2x73 Ah Charging time

. . . .

approx. 9 hours Range

. . . .

30-40 km Max. speed

. . . .

10 km/h Braking distance

. . . .

2100 mm Turning circle 180°

. . . .

730 mm Obstacle clearance ability

. . . .

70 mm Max. user weight

. . . .

120 kg Seat width

. . . .

430/480 mm Seat depth

. . . .

360-560 mm*

Backrest height

. . . .

535/605 mm Armrest height

. . . .

170-290 mm Distance between armrests

. . . .

350/400/450 mm Distance between seat cushion and foot plate

. . . .

350-450 mm Backrest angle - adjustable

. . . .

90°-150° manual/el.

Leg rest angle - adjustable

. . . .

90°-175° manual/el.

TECHNICAL SPECIFICATIONS • CHAIRMAN 2S CORPUS

Subject to changes and printing errors. Specifications valid of april 2004. PAB 8024-UK:1. Produced and published by Permobil AB, Sweden. Apr. 2004 Permobil Försäljning & Service AB

Box 120, SE-861 23 Timrå, Sweden Tel: +46-60-595900 Fax: +46-60-575250

E-post: info@permobil.se www.permobil.se

• ESP (Enhanced Steering Performance) maintains course stability and allows safe and controlled driving at maximum speed.

• Individual, adjustable suspension on the drive wheels, rubber-damped rear.

• Large rear wheels, solid or pneumatic. Choose what suits you best.

• Charging socket and brake release easily accessible at the front of the chassis.

• Batteries easily accessible via panels on the side of the chassis.

• The seat is made of modules which can easily be replaced to change the seat depth and width and the backrest height.

• The electronic driving characteristics can be programmed to meet the user’s requirements.

• Ergonomic seat design with built-in, adjustable supports for the curve of the back and trunk.

With the seat elevator, the seat can be raised 20 cm

The leg rests, back, inclination and seat lift are adjusted electrically

Electrically adjustable seat inclination

* 360/410/460/510/560. ** Can be lowered 5 cm with the -50-lift.

STANDARD OPTIONS

Colour options: metallic silver, silver/black, gold/black, red and navy Choice of upholstery: imitation leather, fabric

Choice of seat depth: 36, 41, 46, 51 and 56 cm Choice of seat width: 43 and 48 cm Choice of backrest width: 34, 39 and 44 cm Choice of backrest height: 53 and 60 cm Choice of armrest length: 25, 30, 35 and 40 cm

ADDITIONAL FUNCTIONS 150, 200 mm seat lift

30° seat tilt

Leg rest with divided footplate Leg rest with one-piece footplate Electrical adjustment of leg rest Electrical adjustment of backrest

STANDARD ACCESSORIES Swivelling table with side cutout Swivelling table with central cutout Table with variable inclination Small table, arm rest mounting Large side support

Adjustable head support Short thigh support Long thigh support Calf support set

Belt with quick-release lock

Long self-adjusting belt

Self-adjusting belt

Four-point belt

Arm rest bag

Push handles/Back

Support wheel set

Running time meter

Lighting set

Seat support

Battery

Charger

References

Related documents

This report form is to be used by county extension agents, such as county agricultural agent, home demonstration agent, club agent, and negro agent, reporting on

This will be done by comparing the planned operations through the new 2021 fehmarn belt link route, the current route through the fehmarn passage and by the Jutland

This chapter contains theoretical studies about industrial design engineering, belt conveyor systems, design for safety and ergonomics, tool handle design and ergonomics,

Both the seat belt anchorage adjustment as well as the headrest adjustment will make it possible for the truck driver to adjust the seat to fit them properly.. The drivers will

The negative air moves towards the positive roller and coats the surface of the belt, which partially shields and cancels the roller's charge.. But then the roller rotates and

My project was to deliver two different results: to establish a placement for each component in a new seatbelt system but also to find a combination of various components

Figure 39.9 Mitral annular (LFT to RFT, dashed black; ACOM to PCOM, solid black), anterior leaflet (green), and posterior leaflet (with folding, solid red; without folding, dashed