• No results found

Fabrication and Characterization of ZnO Nanorods Based Intrinsic White Light Emitting Diodes

N/A
N/A
Protected

Academic year: 2021

Share "Fabrication and Characterization of ZnO Nanorods Based Intrinsic White Light Emitting Diodes"

Copied!
2
0
0

Loading.... (view fulltext now)

Full text

(1)

Linköping Studies in Science and Technology

Dissertations, No. 1401

Fabrication and Characterization of

ZnO Nanorods Based Intrinsic White

Light Emitting Diodes

Nargis Bano

(2)

Deptartment of Science and Technology

Linköping University, SE-601 74 Norrköping, Sweden

N

argis Bano

Fabrication and Characterization of ZnO N

anorods Based Intrinsic White light Emitting Diodes

N

orrköping 2011

Nargis Bano received her M.Sc. degree in Physics from the Islamia University Bahawalpur Pakistan in 2005. She car-ried out her postgraduate studied at the Physical Electronics and Nanotechnolo-gy Division, Department of Science and Technology (ITN), Linköping University Sweden in 2011.

References

Related documents

In paper II, different ZnO nanostructures (nanorods, nanotubes, nanoflowers, and nanowalls) were grown on p-GaN and the luminescence properties of these nanostructures based

1441, 2012 Physical Electronics and Nanotechnology Department of Science and Technology (ITN) Linköping University, se -601 74 Norrköping,

In paper VII we used depth resolved cathodoluminescence to gain detailed information on the luminescence centers and verify the origin of specific emissions from the ZnO

Magnus Willander at the Physical Electronics and Nanotechnology Division, Department of Science and Technology (ITN), Campus Norrköping, Linköping University, Sweden. His

The studies presented in this thesis are part of a body of research in Resilience Engineering (RE) that in the past decade has developed theories, methods and models, and

Inspired by the findings that JR2KC was membrane active when conjugated to liposomes the interactions of the amphipathic coiled coil peptides KIC, KVC, EI and EV (peptides described

As an illustrative example; if using an industrial robot equipped with force control, and using the ART system for fixtures, this enables technical solutions like

If the calculated IR spectra are compared with the experimental ones for formic acid at ZnO, one sees that in the calculated IR spectra for formic acid in monodentate adsorption