• No results found

Material 7280

N/A
N/A
Protected

Academic year: 2021

Share "Material 7280"

Copied!
1
0
0

Loading.... (view fulltext now)

Full text

(1)

Trelleborg Sealing Solutions Bridgwater

Dunball Park, Dunball, Bridgwater, Somerset, TA6 4TP, United Kingdom Telephone: +44 (0) 1278 686800, Fax: +44 (0) 1278 686848 Trelleborg Sealing Solutions UK Ltd Registered number: 446036 England,

WEPF248 Registered Office Ashchurch, Glos. GL20 8JS. www.trelleborg.com ISSUE 01

Material Data Sheet

Material 7280

Description:

A high grade composition of virgin PTFE compounded with glass fibre and lubricant.

Specifically developed for use in rotary sealing applications, notably in rotary shaft seals.

Material 7280 also exhibits outstanding resistance to most fluids and is only chemically

attacked by alkali metals and fluorinating agents at high temperature.

Colour:

Grey

(The colour of the material may have variation in shading).

Property Test Conditions Standard Unit Typical value

GENERAL

Specific Gravity 21°C ASTM D792 g/cm3 2.26 0.04 Shore D Hardness 21°C ASTM D2240 Shore D 56-61 MECHANICAL

Tensile stress @ break 21°C ASTM D4894 MPa 18 min ASTM D4894 psi 2600 Tensile elongation @ break 21°C ASTM D4894 % 250 min

Temperature Range: -100°C to +260°C

Note: Physical properties obtained on dumb-bells cut from turned, thin-wall cylinder.

The reported values are given as the first results obtained from this material; this means that the present data are not meant to be typical nor specification values

® Registered trademark of Trelleborg Sealing Solutions Bridgwater

® The turquoise colour is a Registered trademark for products of Busak + Shamban © Copyright 2006, Trelleborg Sealing Solutions Bridgwater

This is an uncontrolled copy of the Trelleborg Sealing Solutions Bridgwater material data sheet.

Trelleborg Sealing Solutions Bridgwater assumes no responsibility for performance, expressed or implied, and warranty is limited to replacement of product for defects in material and workmanship.

Based upon our ongoing seals and material development programme, Trelleborg Sealing Solutions Bridgwater reserve the right to change properties contained within this Material data sheet, in light of experience, without further notice.

References

Related documents

Case concerning Military and Paramilitary activities in and against Nicaragua (Nicaragua v.United States of America), I.C.J, Judgment 27 June 1986 and Barcelona Traction, Light

No other model has had greater influence on the way market participants price and subsequently hedge derivatives (Hull 2012). The factors included in the model’s pricing formula

METHODS TO REDUCE THE AMOUNT OF INFORMATION IN CT- IMAGES 3.1 Levels of density for different defects 3.2 Spatial resolution 3.3 Describing knot geometry and outer

Some of the normalized values, displayed chapter 5.1 in figure 29-36 are dipping under the value 1. If this happens such as in figure 33 where the blue, green and orange

Evidence of mispricing is also provided by the positive estimated effect of employee relations on stock returns during July 1992-June 2003, and the negative estimated effects of

The MAPE value at first glance might seem low, but according to Wang et al., (2017) the warranty cost could range between 2-15% of net sales and if the net sales

This table was formed by the result of the 3 torque experiments, including the measures on torque, height of wedge, pressure read by the force sensor and the calculation of

School of Engineering, Department of Mechanical Engineering Blekinge Institute of Technology, Campus Gräsvik. SE-371 79