• No results found

SVENSK STANDARD SS-EN ISO 182-4

N/A
N/A
Protected

Academic year: 2022

Share "SVENSK STANDARD SS-EN ISO 182-4"

Copied!
8
0
0

Loading.... (view fulltext now)

Full text

(1)

SVENSK STANDARD SS-EN ISO 182-4

Handläggande organ Fastställd Utgåva Sida

SVENSK MATERIAL- & MEKANSTANDARD, SMS 2000-10-06 1 1 (1+17)

© Copyright SIS. Reproduction in any form without permission is prohibited.

ICS 83.080

Standarder kan beställas hos SIS Förlag AB som även lämnar allmänna upplysningar om svensk och utländsk standard.

Postadress: SIS, Box 6455, 113 82 STOCKHOLM Telefon: 08 - 610 30 00. Telefax: 08 - 30 77 57 E-post: sis.sales@sis.se. Internet: www.sisforlag.se

Upplysningar om sakinnehållet i standarden lämnas av SMS.

Telefon: 08 - 459 56 00. Telefax: 08 - 667 85 42 E-post: info@sms-standard.se

Prisgrupp P Tryckt i december 2000

Plastics – Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers to evolve hydrogen chloride and any other acidic products at elevated temperatures – Part 4:

Potentiometric method (ISO 182-4:1993)

The European Standard EN ISO 182-4:2000 has the status of a Swedish Standard. This document con- tains the official English version of EN ISO 182-4:

2000.

Swedish Standards corresponding to documents referred to in this Standard are listed in ”Catalogue of Swedish Standards”, issued by SIS. The Cata- logue lists, with reference number and year of Swedish approval, International and European Standards approved as Swedish Standards as well as other Swedish Standards.

Plast – Bestämning av benägenhe- ten hos kompounder och produkter baserade på homopolymerer och sampolymerer av vinylklorid att utveckla väteklorid och övriga sura produkter vid förhöjda temperatu- rer – Del 4: Potentiometrisk metod (ISO 182-4:1993)

Europastandarden EN ISO 182-4:2000 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 182-4:2000.

Motsvarigheten och aktualiteten i svensk standard

till de publikationer som omnämns i denna stan-

dard framgår av ”Katalog över svensk standard”,

som ges ut av SIS. I katalogen redovisas interna-

tionella och europeiska standarder som fastställts

som svenska standarder och övriga gällande svenska

standarder.

(2)
(3)

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM

EN ISO 182-4

September 2000

ICS 83.080

English version

Plastics - Determination of the tendency of compounds and products based on vinyl chloride homopolymers and copolymers

to evolve hydrogen chloride and any other acidic products at elevated temperatures - Part 4: Potentiometric method (ISO

182-4:1993)

Plastiques - Détermination de la tendance des compositions à base d'homopolymères et copolymères du

chlorure de vinyle à dégager du chlorure d'hydrogène et éventuellement d'autres produits acides à températures élevées - Partie 4: Méthode potentiométrique (ISO 182-

4:1993)

Kunststoffe - Bestimmung der Neigung von Formmassen und Erzeugnissen auf der Basis von Vinyl-chlorid- Homopolymeren und -Copolymeren, bei erhöhten Temperaturen Chlorwasserstoff und andere saure Produkte

abzugeben - Teil 4: Potentiometrisches Verfahren (ISO 182-4:1993)

This European Standard was approved by CEN on 8 September 2000.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R O P É E N D E N O R M A L I S A T I O N E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G

Central Secretariat: rue de Stassart, 36 B-1050 Brussels

© 2000 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

Ref. No. EN ISO 182-4:2000 E

(4)

Page 2

EN ISO 182-4:2000

Foreword

The text of the International Standard from Technical Committee ISO/TC 61 "Plastics" of the

International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held by IBN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by March 2001, and conflicting national standards shall be withdrawn at the latest by March 2001.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Endorsement notice

The text of the International Standard ISO 182-4:1993 has been approved by CEN as a European Standard without any modification.

NOTE: Normative references to International Standards are listed in annex ZA (normative).

(5)

Page 3

EN ISO 182-4:2000

(6)

Page 4

EN ISO 182-4:2000

(7)

Page 5

EN ISO 182-4:2000

(8)

Page 6

EN ISO 182-4:2000

References

Related documents

The text of the International Standard ISO 683-17:1999 has been prepared by Technical Committee ISO/TC 17 ”Steel” in collaboration with Technical Committee ECISS/TC 23, ”Steels for

3.9 ekvivalent hörtröskelljudtrycksnivå (monaural hörtelefonlyssning): För ett givet öra, vid en specifi- cerad frekvens, för en specificerad hörtelefontyp och för en

– ISO 11127-2:1993, Preparation of steel sub- strates before application of paints and related products – Test methods for non-metallic blast- cleaning abrasives – Part 2:

– ISO 11125-2, som oförändrad överförts till svensk standard SS-EN ISO 11125-2 Behand- ling av stålytor före beläggning med målnings- färg och liknande produkter –

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 6: Determination of

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which