• No results found

SVENSK STANDARD SS-EN ISO 1600

N/A
N/A
Protected

Academic year: 2022

Share "SVENSK STANDARD SS-EN ISO 1600"

Copied!
6
0
0

Loading.... (view fulltext now)

Full text

(1)

SVENSK STANDARD SS-EN ISO 1600

Handläggande organ Fastställd Utgåva Sida

SVENSK MATERIAL- & MEKANSTANDARD, SMS 1999-05-21 1 1 (1+8)

© Copyright SIS. Reproduction in any form without permission is prohibited.

ICS 83.080.

Standarder kan beställas hos SIS som även lämnar all- männa upplysningar om svensk och utländsk standard.

Postadress: SIS, Box 6455, 113 82 STOCKHOLM Telefon: 08 - 610 30 00. Telefax: 08 - 30 77 57

Upplysningar om sakinnehållet i standarden lämnas av SMS.

Telefon: 08 - 459 56 00. Telefax: 08 - 667 85 42 E-post: info@sms-standard.se

Prisgrupp M Tryckt i augusti 1999

Plastics – Cellulose acetate – Determination of light absorption on moulded specimens produced using different periods of heating (ISO 1600:1990)

The European Standard EN ISO 1600:1999 has the status of a Swedish Standard. This document con- tains the official English version of EN ISO 1600:

1999.

Swedish Standards corresponding to documents referred to in this Standard are listed in ”Catalogue of Swedish Standards”, issued by SIS. The Cata- logue lists, with reference number and year of Swedish approval, International and European Standards approved as Swedish Standards as well as other Swedish Standards.

Plast – Cellulosaacetatplast – Bestämning av ljusabsorbtionen i formsprutade provkroppar tillver- kade vid olika temperaturer

(ISO 1600:1990)

Europastandarden EN ISO 1600:1999 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 1600:1999.

Motsvarigheten och aktualiteten i svensk standard

till de publikationer som omnämns i denna stan-

dard framgår av ”Katalog över svensk standard”,

som ges ut av SIS. I katalogen redovisas interna-

tionella och europeiska standarder som fastställts

som svenska standarder och övriga gällande svenska

standarder.

(2)
(3)

EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM

EN ISO 1600

May 1999

ICS 83.080.00

English version

Plastics - Cellulose acetate - Determination of light absorption on moulded specimens produced using different periods of

heating (ISO 1600:1990)

Plastiques - Acétate de cellulose - Détermination de l'absorption de lumière sur éprouvettes moulées produites

en utilisant différentes périodes de chauffage (ISO 1600:1990)

Kunststoffe - Celluloseacetat - Bestimmung der Lichtabsorption an gepreßten Probekörpern, hergestellt bei

unterschiedlichen Erwärmungszeiten (ISO 1600:1990)

This European Standard was approved by CEN on 16 April 1999.

CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.

This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.

CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.

EUROPEAN COMMITTEE FOR STANDARDIZATION C O M I T É E U R O P É E N D E N O R M A L I S A T I O N E U R O P Ä I S C H E S K O M I T E E F Ü R N O R M U N G

Central Secretariat: rue de Stassart, 36 B-1050 Brussels

© 1999 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members.

Ref. No. EN ISO 1600:1999 E

(4)

Page 2

EN ISO 1600:1999

Foreword

The text of the International Standard from Technical Committee ISO/TC 61 "Plastics" of the International Organization for Standardization (ISO) has been taken over as an European Standard by Technical Committee CEN/TC 249 "Plastics", the secretariat of which is held byIBN.

This European Standard shall be given the status of a national standard, either by publication of an identical text or by endorsement, at the latest by November 1999, and conflicting national standards shall be withdrawn at the latest by November 1999.

According to the CEN/CENELEC Internal Regulations, the national standards organizations of the following countries are bound to implement this European Standard: Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and the United Kingdom.

Endorsement notice

The text of the International Standard ISO 1600:1990 has been approved by CEN as a

European Standard without any modification.

(5)

Page 3

EN ISO 1600:1999

(6)

Page 4

EN ISO 1600:1999

References

Related documents

The text of the International Standard ISO 683-17:1999 has been prepared by Technical Committee ISO/TC 17 ”Steel” in collaboration with Technical Committee ECISS/TC 23, ”Steels for

Den används främst för metallmaterial, men kan också användas för andra material, under förutsättning att de inte reagerar med provningsmediet och inte är alltför

– ISO 11127-2:1993, Preparation of steel sub- strates before application of paints and related products – Test methods for non-metallic blast- cleaning abrasives – Part 2:

– ISO 11125-2, som oförändrad överförts till svensk standard SS-EN ISO 11125-2 Behand- ling av stålytor före beläggning med målnings- färg och liknande produkter –

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 6: Determination of

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which

Preparation of steel substrates before application of paints and related products – Test methods for non-metallic blast-cleaning abrasives – Part 3: Determination of apparent

– ISO 11125-1:1993, Preparation of steel substrates before application of paints and related prod- ucts – Test methods for metallic blast-cleaning abrasives – Part 1: Sampling, which