Prediction of shape distortions during forming and welding of a double-curved strip geometry in alloy 718

http://www.diva-portal.org

This is the published version of a paper published in The International Journal of Advanced

Manufacturing Technology.

Citation for the original published paper (version of record):

Perez Caro, L., Odenberger, E-L., Schill, M., Steffenburg-Nordenström, J., Niklasson, F.

et al. (2020)

Prediction of shape distortions during forming and welding of a double-curved strip

geometry in alloy 718

The International Journal of Advanced Manufacturing Technology, 107(7-8):

2967-2981

https://doi.org/10.1007/s00170-020-05118-y

Access to the published version may require subscription.

N.B. When citing this work, cite the original published paper.

Permanent link to this version:

CORRECTION

Correction to: Prediction of shape distortions during forming

and welding of a double-curved strip geometry in alloy 718

Lluís Pérez Caro

Eva-Lis Odenberger

Mikael Schill

Joachim Steffenburg-Nordenström

Fredrik Niklasson

Mats Oldenburg

# Springer-Verlag London Ltd., part of Springer Nature 2020

Correction to: The International Journal of Advanced

Manufacturing Technology (2020) 106:1441

–1451

https://doi.org/10.1007/s00170-020-05118-y

This original article contained a mistake.

Author name

“Pérez Caro” should be presented as “Lluís

Pérez Caro” as shown above.

The original article has been corrected.

The online version of the original article can be found athttps://doi.org/ 10.1007/s00170-020-05118-y

* Lluís Pérez Caro lluis.perez.caro@ri.se Eva-Lis Odenberger eva-lis.odenberger@ri.se Mikael Schill mikael.schill@dynamore.se Joachim Steffenburg-Nordenström joachim.steffenburg-nordenstrom@gknaerospace.com Fredrik Niklasson fredrik.niklasson@gknaerospace.com Mats Oldenburg mats.oldenburg@ltu.se 1

Division of Materials and Production, RISE IVF AB, Vällaregatan 30, SE-293 38, Olofström, Sweden

2 _{Division of Mechanics of Solid Materials, Luleå University of}

Technology, SE-971 87 Luleå, Sweden

3

DYNAmore Nordic AB, Brigadgatan 5, SE-587 58 Linköping, Sweden

4 _{GKN Aerospace Engine Systems Sweden, SE-461}

38 Trollhättan, Sweden

https://doi.org/10.1007/s00170-020-05234-9

The International Journal of Advanced Manufacturing Technology(2020) 107:2983