SVENSK STANDARD SS-EN ISO 12947-1
Handläggande organ Fastställd Utgåva Sida
Standardiseringsgruppen STG 1999-01-29 1 1 (1+17)
© Copyright SIS. Reproduction in any form without permission is prohibited.
ICS 59.080.30
Standarder kan beställas hos SIS som även lämnar all- männa upplysningar om svensk och utländsk standard.
Postadress: SIS, Box 6455, 113 82 STOCKHOLM Telefon: 08 - 610 30 00. Telefax: 08 - 30 77 57
Upplysningar om sakinnehållet i standarden lämnas av STG.
Telefon: 08 - 13 62 50. Telefax: 08 - 618 61 28 E-post: info@stg.se
Prisgrupp p Tryckt i april 1999
Textiles – Determination of the abrasion resistance of fabrics by the Martindale method – Part 1:
Martindale abrasion testing apparatus (ISO 12947-1:1998)
The European Standard EN ISO 12947-1:1998 has the status of a Swedish Standard. This docu- ment contains the official English version of EN ISO 12947-1:1998.
Swedish Standards corresponding to documents referred to in this Standard are listed in ”Catalogue of Swedish Standards”, issued by SIS. The Cata- logue lists, with reference number and year of Swedish approval, International and European Standards approved as Swedish Standards as well as other Swedish Standards.
Textil – Bestämning av tygers
nötningshärdighet med Martindale- metoden – Del 1: Martindale-
apparaten (ISO 12947-1:1998)
Europastandarden EN ISO 12947-1:1998 gäller som svensk standard. Detta dokument innehåller den officiella engelska versionen av EN ISO 12947-1:
1998.
Motsvarigheten och aktualiteten i svensk standard till de publikationer som omnämns i denna stan- dard framgår av ”Katalog över svensk standard”, som ges ut av SIS. I katalogen redovisas interna- tionella och europeiska standarder som fastställts som svenska standarder och övriga gällande svenska standarder.
EUROPEAN STANDARD NORME EUROPÉENNE EUROPÄISCHE NORM
EN ISO 12947-1
December 1998
ICS 59.080.30
CEN
European Committee for Standardization Comité Européen de Normalisation Europäisches Komitee für Normung
Central Secretariat: rue de Stassart 36, B-1050 BRUSSELS
© 1998 CEN All rights of exploitation in any form and by any means reserved worldwide for CEN national Members
Ref. No. EN 12947-1:1998 E Descriptors: textiles, fabrics, tests, abrasion tests, determination, abrasion resistance, test equipment, specifications
English version
Textiles – Determination of the abrasion resistance of fabrics by the Martindale method – Part 1: Martindale abrasion testing
apparatus (ISO 12947-1:1998)
Textilies – Détermination de la résistance à l’abrasion des étoffes par la méthode Martindale – Partie 1: Appareillage d’essai d’abrasion de Martindale (ISO 12947-1:
1998)
Textilien – Bestimmung der Scheuerbeständigkeit von textilen
Flächengebilden – Martindale-Verfahren – Teil 1: Martindale-Scheuerprüfgerät (ISO 12947-1:1998)
This European Standard was approved by CEN on 15 December 1998.
CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN member.
This European Standard exists in three official versions (English, French, German).
A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions.
CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.
Page 2
EN ISO 12947-1:1998
Contents
Page
Foreword ... 3
Introduction ... 4
1 Scope ... 5
2 Normative references ... 5
3 Definitions ... 6
4 Principle ... 6
5 Apparatus and materials ... 6
6 Auxiliary materials ... 10
7 Assembly and maintenance of the apparatus ... 11
Annex A (normative) Method for checking the Lissajous figure ... 14
Annex B (informative) Method for measuring the indentation hardness of foam 15 Bibliography ... 16
Annex ZA (normative) Normative references to international publications with their relevant European publications ... 17
Page 3 EN ISO 12947-1:1998
Page 4
EN ISO 12947-1:1998
Page 5 EN ISO 12947-1:1998
Page 6
EN ISO 12947-1:1998
